how to replace wiper linkage bushing

Step-by-Step: Replacing Wiper Linkage Bushing

By Robert Lee
AD

Picture this: you're driving in a sudden downpour, and your wiper blades are scraping across the windshield like chalk on a blackboard. You might have a worn-out wiper linkage bushing to blame. Replacing it isn't as daunting as it sounds. Let's dive into the process, step by step.

Before you begin, gather your tools: socket wrench, screwdriver, pry tool, and a new wiper linkage bushing. You'll also need safety glasses and gloves. Now, let's get started.

Accessing the Wiper Linkage

The first task is to gain access to the wiper linkage. Pop your hood and locate the wiper arm. It's that lever that connects your wiper motor to the blade.

AD
How To Re & Re the wiper linkage
How To Re & Re the wiper linkage
EZWipers.com Review and Giveaway
EZWipers.com Review and Giveaway
How To Replace Windshield Wipers: Windshield Wiper Arm Replacement
How To Replace Windshield Wipers: Windshield Wiper Arm Replacement

To remove it, you'll need to unfasten the wiper arm from the linkage. This is usually done using a socket wrench. Make sure to mark the position of the arm relative to the linkage to ensure correct realignment during reassembly.

Disconnecting the Wiper Motor

Next, you'll need to disconnect the wiper motor. It's situated under the hood, usually at the bottom of your windshield. Unplug the electrical connectors and secure them out of the way. You might need to use a screwdriver to remove housing screws.

New installation video on our YouTube channel!
New installation video on our YouTube channel!
the control buttons on a car are clearly visible for us to see in this image
the control buttons on a car are clearly visible for us to see in this image

Once disconnected, gently lift the entire wiper assembly out of the way. Be careful not to damage any components.

Removing the Old Wiper Linkage Bushing

Now, you'll see the wiper pivot point. The bushing is the round, rubbery piece that rotates within the wiper frame. If it's chattering or squeaking, it's time for a replacement.

AD

To remove it, you might need to use a pry tool or a screwdriver to carefully pop it out. You can use a bit of gentle persuasion, but be careful not to damage the surrounding parts.

Installing the New Wiper Linkage Bushing

With the old bushing out, it's time to install the new one. Ensure the new bushing is clean and dry. Apply a very thin coat of grease to the new bushing, but avoid getting any on the surrounding parts.

Now, push the new bushing into place. It should fit snugly. If it's too stiff or too loose, you might need to trim it a little. Be sure to test-fit before committing.

AD

Reassembling the Wiper Assembly

With the new bushing in place, it's time to reassemble the wiper assembly. Reconnect the wiper motor, ensuring the electrical connectors are properly aligned and secure.

Next, reinstall the wiper arm onto the linkage. Make sure it's aligned correctly with your previous markings. Tighten the bolt securely, but don't overtighten. Wiper arms should move freely.

Testing Your New Wiper Linkage Bushing

Before you close the hood, test the wipers. Turn them on and let them complete a full cycle. The blades should glide smoothly across the windshield with no chattering or squeaking.

AD

If everything works as expected, close the hood and admire your handiwork. In case of any issues, double-check your work and ensure all parts are properly aligned and secure.

Replacing a wiper linkage bushing might seem like a daunting task, but with the right tools and patience, it's well within the reach of any DIY enthusiast. Next time you're caught in a rainstorm, you can be confident your wipers will function smoothly and efficiently.

AD