how to replace whirlpool heating element

"How to Replace Your Whirlpool Heating Element: Step-by-Step Guide"

By Emily Young
AD

Is your Whirlpool water heater struggling to meet your hot water needs? A faulty heating element could be the culprit. Don't worry, replacing it is a task you can tackle yourself, armed with the right tools and a bit of know-how. This step-by-step guide will walk you through the process, ensuring your water heater is back in top shape in no time.

Before you get started, it's crucial to understand that safety should always be your top priority. Ensure the water heater is turned off at the circuit breaker, and allow the water in the tank to cool down to prevent any burns or scalds. Once you've established a safe working environment, it's time to dive in.

Gathering Your Tools and Materials

Before you start dismantling, make sure you have all the necessary tools and materials at hand. This will save you time and prevent any progress-halting trips to the store.

AD
Replacing a Heating Element on a Whirlpool Dryer
Replacing a Heating Element on a Whirlpool Dryer
How to replace heating element in Whirlpool electric dryer - dryer not heating
How to replace heating element in Whirlpool electric dryer - dryer not heating
So Easy a Granny can Fix It (Whirlpool Dishwasher No Heat)
So Easy a Granny can Fix It (Whirlpool Dishwasher No Heat)

Here's a list of what you'll need:

  • Screwdriver (flathead and/or Phillips, depending on your model)
  • Needle-nose pliers
  • Adjustable wrench
  • New heating element (ensure it's a perfect match for your model)
  • Rubber gloves
  • Towels or a bucket for cleaning up any drips

Draining the Water Heater Tank

As water heaters hold a significant amount of water, it's essential to drain the tank before starting any work. This will make handling the heating element safer and easier. To drain the tank, follow these steps:

How To Replace a Heating Element | Whirlpool Dryer Repair 279838
How To Replace a Heating Element | Whirlpool Dryer Repair 279838
Is It Worth Replacing the Heating Element in a Tumble Dryer?
Is It Worth Replacing the Heating Element in a Tumble Dryer?
  1. Turn off the water heater at the circuit breaker.
  2. Turn off the water supply valves connected to the water heater.
  3. Connect a garden hose to the drain valve at the bottom of the tank.
  4. Run the other end of the hose to a nearby drain or outside.
  5. Open the drain valve and allow the tank to empty completely. This may take some time.

Accessing the Heating Element

With the water tank drained, it's time to access the heating element. Here's how:

  1. Remove the panels or access cover from the side of the water heater, exposing the heating element.
  2. Use your screwdriver to remove the mounting screws holding the heating element in place.
  3. With the heating element now loose, grab it with needle-nose pliers and gently pull it out of its opening.

Installing the New Heating Element

Now that you've removed the faulty heating element, it's time to install the new one. The installation process is essentially the reverse of the removal process. But to ensure you're doing it correctly, follow these detailed steps:

AD

Preparing the New Heating Element

Before you start, inspect the new heating element to ensure it's compatible with your water heater. Also, check the element's wattage to make sure it matches the original one. If it doesn't, it won't heat your water correctly.

Securing the New Heating Element

With your new heating element ready, follow these steps to secure it in place:

  1. Insert the new heating element into the opening in the water heater tank.
  2. Once the heating element is fully seated, replace the mounting screws and tighten them firmly but carefully. Be mindful not to overtighten and strip the screw holes.

Reassembling and Testing the Water Heater

With the new heating element installed, you can now reassemble your water heater and test it to ensure it's working correctly.

AD

Filling the Water Heater Tank

Before you can test the water heater, you'll need to refill the tank. Here's how:

  1. Close the drain valve.
  2. Remove the garden hose from the drain valve.
  3. Turn on the water supply valves.
  4. Allow the tank to fill completely. You'll know it's full when water starts to trickle from the pressure relief valve at the top of the tank.

Testing the Water Heater

Finally, it's time to test your newly replaced heating element:

  1. Turn on the circuit breaker, restoring power to the water heater.
  2. Listen for the water heater to kick on. You should hear a clicking sound if the heating element is working.
  3. Leave the water heater on for about an hour to allow the water to heat up.
  4. After an hour, turn a hot water faucet on and let some water run. If the water is hot, your new heating element is working perfectly.

Congratulations! You've successfully replaced your Whirlpool water heater's heating element. Regular maintenance like this will keep your water heater running efficiently and prolong its lifespan. If you found this guide helpful, don't forget to share it with others who might also benefit from your newfound expertise. Happy DIY-ing!

AD
AD