how to replace whirlpool fridge water filter

Easy Steps to Replace Whirlpool Refrigerator Water Filter

By Robert White
AD

Is your Whirlpool refrigerator's water and ice tasting less than fresh? It might be time to replace the water filter. Don't worry, it's a quick and easy process that can significantly improve your drinking and cooking experience. Let's dive into how to replace your Whirlpool fridge water filter step by step.

Before you start, ensure you have a new Whirlpool EveryDrop water filter (model number W10295370A001 or W10346470A001) ready. These filters are designed to reduce specific contaminants, improve taste and odor, and ensure your refrigerator remains in optimal condition. Now, let's get started.

Gathering Your Tools and Locating the Filter

First, you'll need a few tools: a screwdriver (usually Phillips head), some paper towels, and a new filter. The filter is typically located in the bottom right corner of the fresh food compartment, behind a grille. If your model is different, consult your refrigerator's owner's manual.

AD
a person is holding an electric toothbrush in front of a water filter
a person is holding an electric toothbrush in front of a water filter
Do Whirlpool Refrigerators Have Water Filters? [And When To Replace Them]
Do Whirlpool Refrigerators Have Water Filters? [And When To Replace Them]
How To Change Ice Maker Filter On Whirlpool – Storables
How To Change Ice Maker Filter On Whirlpool – Storables

To access the filter, you'll need to remove the grille. On many Whirlpool models, this is done by pressing the grille pontlessly inward. If your grille has screws, use your screwdriver to remove them. Be sure to keep these in a safe place for later use.

Removing the Old Filter

With the grille removed, you should see the water filter housing cover with a knob on it. Twist the knob counterclockwise to release the cover. This might require some force. Once released, lift the cover upward to remove it.

EveryDrop Water Filter #4 Installation
EveryDrop Water Filter #4 Installation
how to replace water filter in the fix man whirlpool refrigerator
how to replace water filter in the fix man whirlpool refrigerator

Now, you'll see the old filter. Grasp the filter firmly and turn it counterclockwise to remove it. If the filter won't turn, try shaking the filter housing gently to loosen the old filter. Once removed, discard the old filter responsibly.

Installing the New Filter

Before installing the new filter, remove the protective cap from the end of the filter. Then, firmly grasp the new filter and turn it clockwise to install it. You should feel the filter snap into place when it's fully seated.

AD

Replace the filter housing cover by aligning the arrow on the cover with the arrow on the filter housing, then push downward until you hear it click into place. Then, turn the knob on the cover clockwise to lock it.

Resetting the Filter Change Indicator

After installing the new filter, you'll need to reset the filter change indicator light. This tells you when it's time to replace the filter again. To reset it, press and hold the light for about 3 to 5 seconds until it beeps and turns off.

Congratulations, you've successfully replaced your Whirlpool refrigerator water filter! To ensure the new filter's effectiveness, discard the first three gallons of water to eliminate any trapped carbon dust. When the filter is ready, enjoy fresh, clean water and ice from your Whirlpool refrigerator.

AD

Regularly replacing your refrigerator's water filter not only improves the taste and quality of your water and ice but also helps maintain your appliance's optimal performance. If you ever feel unsure about any part of the process, don't hesitate to consult your refrigerator's owner's manual or contact a professional for assistance.

AD