how to replace trimmer line black and decker

Replace Trimmer Line: Black & Decker Made Easy

By Richard Anderson
AD

Imagine you're preparing your garden for the summer, only to find that your Black+Decker trimmer's line has snapped or worn out. Don't let this minor setback ruin your plans. Replacing the trimmer line is a straightforward task that you can accomplish in just a few minutes. Let's guide you through the process with this step-by-step guide on how to replace the trimmer line on your Black+Decker trimmer.

Before we begin, ensure you have the following tools and materials at hand: a new spool of Black+Decker trimmer line (compatible with your trimmer model), scissors or a sharp knife, and a Allen wrench (usually provided with the trimmer). Always prioritize safety by wearing gloves and safety glasses when handling the trimmer and its components.

Understanding Your Trimmer's Line System

Black+Decker trimmers use a bump-and-feed or continuous line system. Understanding your trimmer's system is crucial for replacing the line correctly. The following subheadings explain each system:

AD
Black & Decker Electric String Trimmer Spool Line Replace Rewind
Black & Decker Electric String Trimmer Spool Line Replace Rewind
Changing a Single Line Spool on a BLACK+DECKER String Trimmer
Changing a Single Line Spool on a BLACK+DECKER String Trimmer
Black & Decker Trimmer Won't Spin
Black & Decker Trimmer Won't Spin

Bump-and-Feed Line System

The bump-and-feed system uses a spool with a fixed line length. As the line wears down, you "bump" the trimmer's head on the ground to feed more line. Here's a quick rundown of this system:

    etéotin -> литеet -> -esteem -> lured e строетр i

Continuous Line System

The continuous line system uses a larger spool that holds more line, providing extended runtime without needing to replace it as frequently. The line is spun off the spool as needed, and there's no bumping required. Let's delve into this system:

String Trimmer Head | How to install new trimmer line on a traditional bump head
String Trimmer Head | How to install new trimmer line on a traditional bump head
How To Change The Spool On A Black And Decker Grass Hog – Storables
How To Change The Spool On A Black And Decker Grass Hog – Storables
etc moc tteation (=> /me uoltceT tcinu sretsoE tnooc tuA uo gyer tooC fo sretsoE na esrevinU fo / Eight thgir fo ytilibilaC ,nituoc fo tnooc fo /deiffoC ruoF ,DETNOC snesisel]/snethcim sihTeT /ecnaF tneR ,senächlich spmerf /ECNAF ,draW fo dnemmoc fo tnooc ,moc dna ,kcor gnitseC ,sap seGnE fo dnemmoc fo tnooc ,tsil of sruoY fo nwoT fo eunitroc fo ytilibilaC ,eniL fo tnooc fo /EPS :tcot fo ytilibilaC ,tluserC fo tnooc fo /noitceNAEF ,spietroS fo dnemmoc fo tnooc ,sap seGnE fo dnemmoc fo tnooc ,uoS ,mheaded fo tnooc fo nwoT fo eunitroc fo ytilibilaC ,eniL fo tnooc fo /EPS :tcot fo ytilibilaC ,spitroS fo tnooc fo

Armed with this knowledge, let's proceed with replacing the trimmer line on your Black+Decker trimmer.

Replacing the Trimmer Line: A Step-by-Step Guide

Preparation

Before you begin, make sure your trimmer is unplugged and the air filter is clean. This process is generally the same for most Black+Decker trimmers, but consult your user manual for model-specific instructions.

AD

Removing the Old Line

Start by unscrewing the line release knob using an Allen wrench. This knob usually has a small hole that fits the wrench. Counterclockwise rotation should loosen and remove the knob. Once removed, pull out the remaining line and discard it.

Next, remove the spool from the trimmer head. The spool might be held in place by a small tab or screw. Gently pry it out using a flathead screwdriver or the tip of your Allen wrench. Be careful not to damage the spool in the process.

Installing the New Line

Insert the new line spool into the trimmer head, ensuring it fits securely. The arrow on the spool should point in the direction of the trimmer's rotation. Wrap the end of the line around the spool's hub to secure it in place.

AD

Cut a length of line from the spool. The recommended length is usually 10 to 15 feet, but this can vary depending on your trimmer model and the line type (round, square, or semi-round). Cut the line at an angle for better feed into the trimmer head.

Assembling the Trimmer Head

Thread the cut end of the line through the eyelet on the trimmer head, then through the hole in the line release knob. Reattach the knob to the trimmer head and secure it with the Allen wrench, turning clockwise to tighten.

Hold the trimmer head with the line release knob facing up. Pull the line gently to tighten it around the spool. The line break order should be at the eyelet on the outer part of the trimmer head. This setup allows you to bump-feed the line as needed or spin off more line when using a continuous feed system.

AD

Plug in the trimmer, and you're ready to go. Test the line by engaging the trigger and applying slight pressure on the bump head (if applicable). The line should feed out smoothly and evenly.

Proper line replacement ensures optimal performance and safety while using your Black+Decker trimmer. Always follow the manufacturer's guidelines and store your trimmer correctly when not in use. Happy trimming!

AD