how to install trimmer line black and decker

How to Install Trimmer Line: Step-by-Step Guide for Black & Decker

By Rachel Harris
AD

Installing trimming line on your Black and Decker trimmer may seem daunting at first, but it's a straightforward process that can save you money on professional services. With the right technique and a few safety precautions, you'll be able to tackle overgrown hedges and unruly edges in no time.

This guide will take you through the step-by-step process of installing trimmer line on your Black and Decker trimmer. Whether you're a first-timer or just need a refresher, our detailed instructions will help you ensure your trimmer is always ready for action.

Assessing Your Trimmer Head

Before you start, it's crucial to understand the type of trimmer head you have. Black and Decker trimmers come with two primary head types: Fixed spool and bump feed.

AD
Black & Decker Electric String Trimmer Spool Line Replace Rewind
Black & Decker Electric String Trimmer Spool Line Replace Rewind
Changing a Single Line Spool on a BLACK+DECKER String Trimmer
Changing a Single Line Spool on a BLACK+DECKER String Trimmer
Black And Decker String Trimmer Edger - How To Use & Review
Black And Decker String Trimmer Edger - How To Use & Review

Fixed spool heads have a single spool that you wind the line around, while bump feed heads house an internal spool that automatically feeds the line as you need it. This guide will focus on the most common, fixed spool heads.

Gathering Your Tools

Before you dive in, make sure you have the following tools and materials readily available:

String Trimmer Head | How to install new trimmer line on a traditional bump head
String Trimmer Head | How to install new trimmer line on a traditional bump head
Refill your own Black & Decker AFS String Trimmer Spool and save!
Refill your own Black & Decker AFS String Trimmer Spool and save!
  • Black and Decker trimmer with a fixed spool head
  • Trimmer line (ensure it's compatible with your trimmer)
  • Scissors or line cutter
  • Gloves and safety glasses

Preparing Your Trimmer

First, unplug your trimmer to ensure safety. Next, inspect the trimmer head. You'll notice two holes on the side, with a spool of line inserted in one and a small, knifelike object sticking out of the other. The line should be coming out of the top of the trimmer head and wrapped around the spool.

If there's no line currently installed, you'll see an empty spool and the knife sticking out. Push the knife gently back into its housing to allow for easier line insertion.

AD

Loading Line onto the Spool

Now that your trimmer is prepped, it's time to load the line onto the spool. Black and Decker recommends using their compatible line, but any .065" or .080" diameter line should work with your fixed spool head.

Starting with the end of the line, carefully begin winding it around the spool. Keep the line taut as you wrap, ensuring it's neither too loose nor too tight. Leave about 6" of line at the end hanging from the spool. Once you've reached the full diameter, tuck the end of the line under the layer below it to secure it.

Inserting the Line into the Trimmer Head

With the line secured on the spool, it's time to insert it back into the trimmer head. Push the end of the line through the hole, pulling it through and out of the top of the trimmer head. Make sure the line is feeding through smoothly and isn't getting stuck or knotted.

AD

Leave around 10-15" of line coming out of the top of the trimmer head. This will be your cutting length. If you've loaded the line correctly, you should now see the spool and line back in the trimmer head, ready for use.

Finalizing the Installation

With the line inserted, gently pull the knife back out of its housing. It should now rest against the line, ready to cut as needed. Plug in your trimmer and give it a try – the line should feed out smoothly as you use it.

Remember to always wear gloves and safety glasses when using your trimmer. Always keep a lookout for any obstructions and never trim wet grass or leaves, as this can cause the line to wrap around the trimmer head.

AD

Maintaining Your Trimmer Line

As you use your trimmer, you'll need to replace the line as it wears down. Walk around your lawn once a season to assess the line's condition and replace it if needed. A good rule of thumb is to replace the line when it's worn down to about 1/3 of its original thickness.

To replace the line, repeat the process outlined above. Always inspect your trimmer head before you begin, and make sure to wind the line in the correct direction (it should go clockwise when looking at the top of the trimmer).

Storing Your Trimmer

After each use, unplug your trimmer and clean any debris from the line and spool. Wipe down the trimmer head and store it in a dry place. Keeping your trimmer clean and well-maintained will help extend its lifespan and ensure it's always ready for use.

Now that you know how to install trimmer line on your Black and Decker trimmer, you're ready to tackle those overgrown hedges and unleash your inner landscaper. Happy trimming!

AD