how to replace toilet gasket

How to Replace a Toilet Gasket

By Joseph Jones
AD

Discovering that your toilet isn't sealing properly can be a frustrating and potentially messy issue. One common cause of toilet leakage or water waste is a worn-out gasket. Luckily, replacing a toilet gasket is a straightforward DIY task that doesn't require professional help. Let's guide you through the process with this comprehensive, step-by-step guide on how to replace a toilet gasket.

Before we dive into the process, let's briefly discuss the causes of a failed gasket. Over time, gaskets can deteriorate due to age, hard water, or extremes in temperature. Understanding the cause can help you determine if there are any underlying issues that need to be addressed.

Preparation and Gathering Materials

The first step in replacing your toilet's gasket is ensuring you have the right tools and materials. Gaskets come in varying sizes, so it's crucial to measure your existing gasket before purchasing a replacement. Here's what you'll need:

AD
Toilet Repair Ring Flange: Fix Leaks, Reset Your Toilet, and Stop a Running Toilet
Toilet Repair Ring Flange: Fix Leaks, Reset Your Toilet, and Stop a Running Toilet
How to Replace Toilet Bowl Gasket | 8 Easy Steps (2026)
How to Replace Toilet Bowl Gasket | 8 Easy Steps (2026)
there is a hole in the floor with a spatula next to it
there is a hole in the floor with a spatula next to it

  • New toilet wax ring and gasket
  • Adjustable wrench
  • TOtile bolt removal tool or a flathead screwdriver
  • Putty knife or old credit card
  • New bolts (if required, match the length to your old bolts)
  • Plastic cap or rubber band

How to Replace a Toilet Wax Ring
How to Replace a Toilet Wax Ring
How to Replace a Toilet (Step-by-Step)
How to Replace a Toilet (Step-by-Step)

Measuring the Gasket

Toilets typically use a wax ring gasket, which is measured by its outside diameter. First, remove the old gasket and bolt caps for measurement. If the gasket is in good condition, you can measure it directly. If not, measure the space where the gasket was placed.

Gaskets usually come in sizes ranging from 3 to 6 inches. Once you've determined the correct size, you can proceed to the next steps.

AD

Preparing the Workspace

Spread a towel or old blanket underneath the toilet to protect your floor from any water, wax, or debri during the process. Place a plastic cap or rubber band over the hole leading to the drain to prevent any debris from falling in.

Preparing the workspace

Removing the Old Gasket

Start by turning off the water supply to the toilet by locating the shut-off valve behind the toilet. Flush the toilet to empty the tank and absorb any remaining water with a towel or rag.

AD

Safety Tip: Always wear gloves when handling old gaskets to protect your hands from bacteria and potential water damage.

Disconnecting the Toilet

Prior to disconnecting the toilet, place a small amount of petroleum jelly on the threads of the closet bolts to make them easier to remove. Using an adjustable wrench, loosen and remove the closet bolts that secure the toilet to the floor.

Next, with the help of a flathead screwdriver or a specialized toilet bolt removal tool, slowly and carefully lift the toilet off its bolts and move it forward. You may need assistance for this step as toilets are heavy. Once lifted, keep the toilet at a slight angle to avoid damaging the old wax ring or causing a mess.

AD

Removing the Old Gasket and Wax

With the toilet moved, you can easily access the old gasket and wax ring. Using a putty knife or old credit card, scrape the wax residue from the toilet horn and the floor. Be sure to remove all traces of old wax to achieve a tight, leak-proof seal with the new gasket.

Removing the old gasket and wax

Installing the New Gasket

Once the old gasket and wax have been completely removed, thoroughly clean the area around the drain opening and the bottom of the toilet where the new gasket will be placed. Inspect the area for any cracks or damage that could cause leaks, and address those issues before installing the new gasket.

Positioning the New Gasket

Mount the new wax ring and gasket onto the horn of the toilet. Ensure that the gasket is properly centered and positioned over the bolt holes. Position the toilet so that the bolts can align with the floor flanges. You can use a small amount of petroleum jelly on the bolts to help with installation.

Positioning the new gasket

Securing the Toilet

Once the new gasket is in position, carefully lower the toilet onto the bolts. Do not let the toilet suddenly drop into place, as this could cause damage or misalignment. Gently guide the toilet while keeping it level and aligned with the drain.

With the help of an adjustable wrench, thread the closet bolts back into place and tighten them evenly. Be careful not to overtighten, as this can crack the toilet or cause leaks. Once the bolts have been tightened, reattach the water supply and test the toilet's functionality by flushing.

Maintaining your toilet's gasket is essential to prevent leaks and water waste. Regularly inspect your toilet and gasket for signs of wear or damage to ensure optimal performance and to avoid costly repairs in the future. If you encounter any challenges or feel unsure about any part of the process, always consult a professional plumber for assistance.

AD