How to Replace Fluidmaster Toilet Fill Valve and Flapper
Is your toilet running, but it won't quite flush? You might have a busted Fluidmaster toilet fill valve or flapper. Don't worry, replacing these parts is a simple DIY task. By mastering the how-to, you can save a bundle on plumber's fees and gain the satisfaction of fixing your toilet yourself.
Before we dive in, gather your tools: flathead screwdriver, adjustable wrench, and channel-lock pliers. You'll also need a replacement Fluidmaster fill valve and flapper. For this guide, we'll focus on Fluidmaster 400CRP and 5500CV models.
Understanding Your Toilet's Inners
Ever wondered how your toilet works? Your fill valve controls water flow from the tank to the bowl. The flapper, meanwhile, lifts to let water flow and seals to hold it in the tank. Let's learn how to replace them.
First, turn off your water supply. The valve is usually behind the toilet. Once off, flush the toilet to drain the tank. Be careful, any remaining water may dribble out.
Removing the Old Fill Valve
Start by disconnecting the water supply line from the bottom of the fill valve. This can be a bit tricky, so use channel-lock pliers gently. Now, unhook the chain from the flapper and remove the lock nut at the base of the valve using an adjustable wrench.
With the lock nut off, the entire fill valve should lift out. If it's stuck, try rocking it from side to side. If that fails, carefully pry it out with a screwdriver.
Installing the New Fill Valve
First, wrap the new valve's base with plumber's tape for a tight seal. Drop the new valve into the hole and secure it with the lock nut, using a clockwise motion. No need to overtighten.
Next, reattach the water supply line. Slowly turn on the water supply valve, listening for any leaks. If it's tight, reconnect the chain to the flapper arm and adjust it to prevent the flapper from resting on the hole.
Replacing the Flapper
Flapper replacement is even easier. Just follow these steps:
Removing the Old Flapper
Start by disconnecting the chain from the flapper and lift it out. You might need to rock it back and forth to break the suction. Don't worry, modern flappers don't typically stick as badly as older ones.
Remove the old flapper's connective wire from the back of the flush lever. Then, pull the old flapper off the lever post. You might need to twist and pull it gently.
Installing the New Flapper
Start by threading the wire through the new flapper's hole. Then, slip the new flapper over the flush lever post. Ensure it's oriented correctly— tuvieron means "towards the tank," so you don't want it facing the wrong way.
Hook the wire back onto the flush lever, keeping the flapper loose enough to lift and drop easily. Then, reattach the chain, adjusting the length for a perfect seal. Flush the toilet to test your work— the water level should rise and the new flapper should seal perfectly when you flush.
There you have it! Now you know how to replace a Fluidmaster toilet fill valve and flapper, saving yourself a service call and gaining a new home maintenance skill. Happy tinkering!