how to replace the screen on an iphone 6

How to Replace a Broken iPhone 6 Screen

By Amanda Moore
AD

Is your iPhone 6's screen cracked or broken? Don't let a damaged display hinder your user experience any longer. Although it might seem daunting, replacing an iPhone screen is a doable task with the right guidance. Let's walk you through the steps toSafe and successful screen replacement for your iPhone 6.

Before we commence, a word of caution: professional repair is always recommended to avoid potential damage. If you're uncomfortable performing any of these steps, we advise taking your device to a certified technician. Additionally, ensure you have the necessary tools and the new screen before starting.

Gather Tools and Prepare Your Workspace

Assembling the right tools is crucial for a smooth iPhone 6 screen replacement process:

AD
How To Replace A Damaged Or Cracked iPhone 6s Screen - The DIY Life
How To Replace A Damaged Or Cracked iPhone 6s Screen - The DIY Life
iPhone 6 Screen Replacement
iPhone 6 Screen Replacement
Iphone 6 screen and battery Replacement
Iphone 6 screen and battery Replacement
  • New screen assembly
  • Pentalobe P2 screwdriver (to remove the display screws)
  • iOpener (to soften the adhesive)
  • Two spudgers
  • Tweezers
  • Small notebook or cardboard (to prop up your iPhone's back cover)

Once you've gathered all the tools, prepare a well-lit, clutter-free workspace. It's also a good idea to ground yourself to prevent electrostatic discharge (ESD).

Back Up Your Data and Power Off Your iPhone

Before starting, ensure you've backed up any essential data. Connect your iPhone 6 to your computer, open iTunes, and create a backup. Afterward, power off your iPhone:

Issuu Reader
Issuu Reader
  1. Press & hold the Power button.
  2. Drag the 'slide to power off' slider on the screen.

Remove the Pentalobe Screws and Display Assembly

Using the Pentalobe P2 screwdriver, remove the two pentalobe screws at the bottom of your iPhone 6. Then, insert a spudger between the bottom edge of the display and the rear case, applying gentle upward pressure. Work along the edge, breaking the adhesive seal as you go:

Warm the Adhesive and Separate the Display Assembly

Use the iOpener to warm the lower edge of the iPhone. Apply the heated iOpener to the bottom edge of the display for about 2-3 minutes. This softens the adhesive, making it easier to separate the display.

AD

Insert a spudger slightly above the bottom edge of the display, angled 30-45 degrees, and carefully slide it upward. The display should start to separate from the rear case. Continue working around the edges, using a spudger to gradually separate the adhesive.

Replace the Screen

Now that your iPhone 6's display is separated, it's time to replace the screen:

Remove the Old Screen

Start with the bottom edge of the display. Use a spudger to break the adhesive seal, and gently lift up the display. Continue around the edges, using a spudger to break the adhesive and remove the old screen.

AD

Install the New Screen

Before installing the new screen, remove any protective films. Align the new screen with the iPhone 6's frame, ensuring that theFlex cables are correctly positioned. Gently press the new screen into place, using the edges of the frame as a guide.

Re-apply the adhesive and re-assemble your iPhone 6, following the steps in reverse order. Before powering on your iPhone, ensure all the components are correctly installed, and the Display Assembly is secure.

Congratulations! You've successfully replaced your iPhone 6's screen. While the process might seem daunting, with careful attention to detail and patience, it's an achievable task. If you've encountered any difficulties or have further questions, don't hesitate to seek assistance from a certified technician. Happy repairing!

AD
AD