How to Replace Spigot Handle
When the handle on your spigot breaks, won't turn, or leaks, it's crucial to replace it to maintain proper water flow and prevent potential leaks. Fortunately, replacing a spigot handle is a straightforward DIY task that requires minimal tools and effort. This guide will walk you through the process step by step, ensuring you achieve a successful and long-lasting result.
Preparation and Removing the Old Handle
Before you start, ensure the water supply to the spigot is turned off. Locate and close the shut-off valve beneath the sink or outside, if accessible. If you can't find the valve, you may need to shut off the main water supply or use a water supplyauenching tool.
Once the water is off, open the faucet to relieve any residual pressure and prevent water from spilling when you remove the handle. Now, let's take the old handle off:
- Inspect the handle and locate any screws or bolts securing it to the spigot. If there are no visible fasteners, the handle may be held on by a setscrew hidden beneath a cap or inside the faucet lever arm.
- Using a Philip's or flathead screwdriver, or an adjustable wrench if there's a nut and bolt configuration, carefully remove the hardware. If you find a setscrew, use an Allen wrench or a thin screwdriver to loosen it.
- Once the fasteners are removed, carefully unscrew the handle and pull it off the faucet. If it's stuck, use a rag to protect the finish and gently tap it with a hammer to loosen it.
Inspecting the Stem Assembly
With the handle off, you should see the stem assembly – a combination of valve, packing nut, and stem – inside the faucet housing. If everything looks in good shape, you can proceed. If the parts appear worn or damaged, it may be best to replace the entire stem assembly before installing the new handle.
Before installing the new handle, ensure the new parts are compatible with your faucet type and that you've purchased the correct handle for the spigot's configuration (i.e., single or double-handled). If your faucet has an anti-siphon device, also ensure you get a compatible handle.
Installing the New Spigot Handle
Now that you've removed the old handle and ensured everything is in good working order, it's time to install the new one. First, install the necessary parts (such as O-rings, springs, or gaskets) that came with your new handle according to the manufacturer's instructions. Then, follow these general steps:
Preparing the Faucet
Before installing the new handle, apply some plumber's grease to the threads and exterior parts of the new stem or ball joint. This helps ensure a smooth operation and prevents leaks. If your new handle came with felt washers, place them around the stem or ball joint before applying the grease.
Attaching the New Handle
Insert the new stem or ball joint into the faucet body until it seats properly. Once in place, start threading the new handle onto the stem or ball joint.
- If your new handle came with screws or bolts, tighten them by hand as much as possible, then use a screwdriver or wrench to secure them fully. Be careful not to overtighten and strip the threads or damage the finish.
- For handles held on by a setscrew, thread the setscrew into the stem or ball joint by hand until it's snug, then use an Allen wrench or a thin screwdriver to tighten it further.
Once the new handle is securely attached, turn the water supply back on at the shut-off valve and check for any leaks. If everything is in order, your new spigot handle should function perfectly, allowing you to enjoy trouble-free water flow for years to come.
Regularly inspect and maintain your spigot handles to keep them in good working order and prevent future issues. If you ever encounter problems or need further assistance, don't hesitate to seek help from a professional plumber.