how to replace shallow well pump

How to Replace a Shallow Well Pump

By James Young
AD

Is your shallow well pump causing trouble? Not to worry, replacing it can restore your water supply and peace of mind. Whether you're a plumbing novice or an experienced DIYer, this comprehensive guide will walk you through the process, ensuring you understand every step along the way. Let's dive in!

Before we start, safety is our top priority. Make sure to turn off the electricity to your pump and water supply to avoid hazards. Now, let's plan ahead. Gather your tools and materials - you'll need a new pump, a screwdriver, pliers, a hacksaw, Teflon tape, and lubricant. Having these on hand will make your replacement task much smoother.

The Right Pump for the Job

Choosing the correct replacement pump is crucial. Measure your well's depth and consult your local well contractor or pump supplier to ensure you get the right capacity and depth rating for your new pump.

AD
How to Replace a Submersible Well Pump
How to Replace a Submersible Well Pump
a man is working on an old carbuncing machine that has been turned upside down
a man is working on an old carbuncing machine that has been turned upside down
How to Install a Shallow Well Water Pump | 7 Easy Steps (2026)
How to Install a Shallow Well Water Pump | 7 Easy Steps (2026)

Once you've selected the perfect pump, double-check it's a direct replacement for your existing one. Replace 'like for like' regarding impeller size, pipe diameter, and voltage to avoid any complications during the installation.

Preparation: Removing the Old Pump

How To Install A Shallow Well Jet Pump
How To Install A Shallow Well Jet Pump
a man is working on plumbing in his home
a man is working on plumbing in his home

Shut Off and Drain

Start by shutting off the water supply and draining the pressure tank. Open a faucet connected to your well system to release remaining water and pressure. Then, disconnect the power supply to the pump.

AD

Disconnect and Remove

Disconnect the wire connections carefully and safely, paying close attention to the power leads to avoid confusing them during reinstallation. Now, you're ready to disconnect the plumbing. Start by releasing the discharge pipe connection, using a pipe wrench if necessary. Lastly, remove the pump from its, likely concrete, holding basin.

Installing the New Pump

Prepare the Pump

Before installing, lubricate the motor and shaft with a suitable grease. This prevents future corrosion and ensures the pump operates smoothly. Apply Teflon tape to the pipe threads to create a watertight seal.

AD

Secure the Pump

Position the new pump in its holding basin and secure it, usually with screws or bolts. Ensure it's stable and won't move around. If your pump isn't deep enough, you might need to extend the pipe with a coupling and additional pipe length.

Plumb the Pump

Connect the new pump to the existing pipes. Ensure all connections are tight and secure, using Teflon tape where necessary. Recharge the system by opening the strainer cap and priming the pump using a funnel. Pour water into the funnel until it's full.

AD

Power Up

With all plumbing connections secure, reconnect the power leads. Ensure you've matched the wire colors and positions accurately. Once everything is connected, test your new pump by turning it on and checking for water flow at an open faucet.

Success! Your shallow well pump replacement is complete, and you're ready to enjoy a robust water supply again. Regularly inspect your new pump to ensure it stays functional and reliable. Should you encounter any issues, don't hesitate to consult a professional plumber.

AD