how to replace screen on iphone 6

Iphone 6 Screen Replacement: A Step-by-Step Guide

By Rachel Garcia
AD

Accidents happen, and before you know it, your once-pristine iPhone 6 screen is cracked or shattered. Fret not, for you're about to learn a step-by-step guide on how to replace a screen on an iPhone 6. Remember, this process involves delicate components, so be patient and attentive to details. Let's dive right in.

First, gather your tools and replacement screen kit. You'll need a SIM card removal tool, a Pentalobe P2 driver (supplied with your kit), a Phillips #00 screwdriver, a spudger, tweezers, and of course, your iPhone 6 screen replacement kit. Ensure you have a well-lit, clutter-free workspace for optimal handling of tiny parts.

Preparing Your iPhone 6 for Screen Removal

Before you start, back up your data to iCloud or a computer to prevent any potential data loss. Then, power off your iPhone 6 by holding down the power button until the 'slide to power off' slider appears. Slide it to turn off your device.

AD
How To Replace A Damaged Or Cracked iPhone 6s Screen - The DIY Life
How To Replace A Damaged Or Cracked iPhone 6s Screen - The DIY Life
iPhone 6 Screen Replacement
iPhone 6 Screen Replacement
Iphone 6 screen and battery Replacement
Iphone 6 screen and battery Replacement

Now, use the SIM card removal tool to eject the SIM card tray. This will give you better access to the screws you need to remove. With your Phillips #00 screwdriver, carefully unscrew the two Pentalobe screws at the bottom of your iPhone. Be gentle to avoid stripping the screws.

Opening the iPhone 6

Using your spudger, gently pry the bottom edge of your iPhone's case to create a small opening. Slip the spudger into the gap and twist it to break the adhesive seal. Be careful not to slice the cables beneath. Work your way around the device, breaking the adhesive seals and separating the front and back cases.

How to replace LCD Screen iPhone 6
How to replace LCD Screen iPhone 6

Once separated, use tweezers to pull out the metal grounding clip from the bottom of the front case. This clip is connected to the rear case and prevents the two from separating. Set the rear case aside once done. You should now be looking at the internal components of your iPhone 6.

Removing the Display Assembly

Before removing the display, disconnect the battery from the logic board to prevent any electrical shorts. Use your spudger to disconnect the battery connector by gently prying it upwards from its socket. Next, use the Phillips #00 screwdriver to remove the following screws: the three 1.2 mm Pentalobe screws near the bottom edge, and the two 1.6 mm Pentalobe screws near the top edge.

AD

Now, gently lift the front panel assembly (display) from the rear case. The display is still connected to the rear case by several cable connectors. Exercise caution while disconnecting these. Once disconnected, set the display aside. You've successfully removed the old screen!

Installing the New Screen

Before installation, ensure your new screen has the same display specifications as your original one. Align the new screen with the rear case, ensuring the display cables point towards the top edge. Connect the display cables to their respective sockets on the logic board, then press the display firmly into place.

Carefully line up the screw holes with the screw posts on the rear case. Use your screwdriver to securely fasten the new screen with the five Pentalobe screws you removed earlier. Make sure all screws are correctly placed and tightened.

AD

Reassembly and Testing

Reassemble your iPhone 6 by reversing the steps you took during disassembly. Be extra careful when reattaching the rear case to ensure a firm fit. Once reassembled, power on your iPhone 6 by holding down the power button until the Apple logo appears. If everything is working as it should, your iPhone 6's new screen should be functioning perfectly.

Remember, screen replacement may void your warranty, and this process should only be attempted if you're comfortable handling small parts and following meticulous instructions. If in doubt, always consult a professional. Good luck, and happy fixing!

AD