how to replace screen iphone 6

How to Replace Screen on iPhone 6

By Laura Wilson
AD

Is your iPhone 6's screen cracked, shattered, or unresponsive? Replacing the screen can restore your device to its former glory. Here's a step-by-step guide on how to replace a screen on an iPhone 6, ensuring your device's longevity and your peace of mind.

Before we dive in, ensure you have the following tools and replacement parts ready: an iPhone 6 screen replacement kit, a heat gun or iOpener, five-point Y tool, tweezers, and a suction cup. Also, remember to backup your iPhone data before starting the process.

Preparation and Screen Removal

The first step is to prepare your iPhone for the screen replacement. Here's how:

AD
How To Replace A Damaged Or Cracked iPhone 6s Screen - The DIY Life
How To Replace A Damaged Or Cracked iPhone 6s Screen - The DIY Life
How To Replace A Shattered Screen on iPhone 6/6s/7 | The DIY Life — The DIY Life
How To Replace A Shattered Screen on iPhone 6/6s/7 | The DIY Life — The DIY Life
iPhone 6 Screen Replacement
iPhone 6 Screen Replacement

1. Power down your iPhone 6 by holding down the power button until the 'slide to power off' prompt appears. This helps prevent any damage to your data during the replacement process.

Accessing the Screen

The iPhone 6's screen is secured to the device using adhesive. To access it, you'll need to heat up the adhesive to make it more pliable. Use your heat gun or iOpener to heat the bottom of the screen, being careful not to overheat it.

Iphone 6 screen and battery Replacement
Iphone 6 screen and battery Replacement

Once the adhesive is heated, carefully insert the five-point Y tool between the screen and the iPhone's body. Gently slid the tool along the bottom edge, breaking the adhesive seal.

Dismantling the Screen

With the bottom of the screen freed, insert the suction cup onto the bottom edge of the screen. Lightly pull up to create a small gap. Be careful not to pull too hard, as you could damage the screen or the iPhone's body.

AD

Insert the five-point Y tool into the gap and slide it along the edges to break the remaining adhesive. With the adhesive completely broken, you can now fully remove the screen from the iPhone 6.

Replacing the Screen

Now that you've successfully removed the damaged screen, it's time to replace it with the new one.

First, carefully align the new screen with the iPhone's body. Apply the adhesive from the replacement kit along the edges of the screen. This ensures a secure fit and helps prevent any dust or debris from getting inside your iPhone.

AD

Securing the New Screen

Once the adhesive is applied, carefully place the new screen onto the iPhone, ensuring it's properly aligned. Gently press down on the screen, applying even pressure along the edges to secure it in place.

Use the five-point Y tool to carefully check under the screen, ensuring no gaps remain and the adhesive has securely adhered the screen to the iPhone's body.

Reassembly

Now that your iPhone 6's screen is replaced, the final step is to reassemble your device. Follow the removal steps in reverse order: reattach the Home button assembly, the AMC (Apple Merom Chip), and finally, reinsert the screws using the provided screwdriver.

AD

Power up your iPhone 6, and you should now have a fully functional, like-new device.

Congratulations, you've successfully replaced your iPhone 6's screen! Regularly caring for your device, including protecting it from drops and impacts, can significantly extend its lifespan. Remember, if you're unsure about any part of the process, consult a professional repair service to maintain your device's warranty and ensure optimal performance.

AD