How to Replace Samsung Water Filter
If your Samsung water filter is due for replacement, you've come to the right place. We'll guide you through a simple, step-by-step process to ensure your Samsung refrigerator's water dispenser continues to provide fresh, clean water. Let's dive right in.
First, it's essential to understand why and when to replace your water filter. Samsung recommends replacing your filter every 6 months or 300 gallons, whichever comes first. This ensures optimal performance and maintains the high water quality you expect from your Samsung appliance.
Identifying Your Samsung Water Filter
Before you proceed, it's crucial to identify your filter model. Samsung uses various filters, including the DA29-00020B, DA97-00020B, and DA97-00020A, among others. You can find your model number on the filter itself or look up your refrigerator's model number in your user manual to determine the compatible filter.
Once you've identified your filter model, it's time to purchase a replacement. Make sure to buy a genuine Samsung water filter to ensure optimal performance and longevity for your refrigerator.
Preparing for Replacement
Before you begin, gather the necessary tools: new water filter, Phillips #2 screwdrive (for some models), and a small bowl or cup to catch any water spills. Also, ensure you have a valid Samsung account and the SmartThings app, as you'll need to register your new filter after installation.
The process may vary slightly depending on your refrigerator model. For this guide, we'll focus on Samsung's French-door and side-by-side refrigerators. Start by turning off the ice maker and water dispenser at the control panel. Then, remove any remaining water from the filter housing by pressing and holding the dispenser button for 10 seconds.
Removing the Old Filter
Locate the water filter housing, usually found near the top of your refrigerator, behind the right-side panel, or along the bottom front. Twist the old filter counterclockwise to unlock it. If your filter has screws, use your Phillips #2 scredrive to remove them. Now, gently pull or twist the filter to remove it from the housing.
As you remove the old filter, you may notice some water dripping. No worries – this is normal. Place your small bowl or cup underneath to catch any spills. Once the old filter is out, discard it responsibly, and let's move on to installing your new one.
Installing the New Water Filter
Before installing the new filter, ensure it's facing the correct direction. The arrow on the filter should point towards the refrigerator door. If your new filter has screws, attach them now using your Phillips #2 scredrive.
Next, gently push the new filter into the housing while turning it clockwise. You should feel it click into place. If your filter has a straightforward push-and-twist mechanism, simply insert it, twist slightly, and push until you hear it click.
Registering the New Filter
Now that your new filter is installed, it's time to register it in the SmartThings app. This will help you keep track of when to replace your filter next. Open the app and select your refrigerator. Tap on 'Filter' to register your new filter. Follow the on-screen instructions, and you're done!
To confirm that your new filter is working correctly, run some water through the dispenser. You may notice a slight difference in taste or smell during the first few gallons, but this will pass as the filter settles in.
Resetting the Water Filtration Indicators
After registering your new filter, you'll need to reset the water filtration indicators on your refrigerator. Make sure your refrigerator door is closed, then press and hold the dispenser lever for 3 to 5 seconds. You should hear a beep, indicating that the indicators have been reset.
Congratulations! You've successfully replaced your Samsung water filter. You can now enjoy clean, fresh water from your refrigerator's dispenser.