how to remove kitchenaid water filter

How to Remove KitchenAid Water Filter

By John Thomas
AD

If you've noticed a decrease in water pressure from your Kitchenaid refrigerator's water dispenser, it might be time to replace the water filter. Despite their convenience, these filters need to be changed regularly to maintain optimal water quality and prevent clogs. Here's a step-by-step guide on how to remove and replace your Kitchenaid water filter for a seamless experience.

Before we dive into the process, make sure you have a new Kitchenaid filter (like the KWF-100 or equivalent) and some towels or a bowl handy to catch any water spills. Remember, changing the filter every 6 months ensures fresh, clean water. Now, let's get started.

Locating and Removing the Old Filter

The water filter is typically located behind a panel on the bottom or side of your Kitchenaid refrigerator. The location may vary depending on your model, so consult your user manual if you're unsure.

AD
(VIDEO) How Do You Remove a Stuck Refrigerator Water Filter?
(VIDEO) How Do You Remove a Stuck Refrigerator Water Filter?
a person is holding an electric toothbrush in front of a water filter
a person is holding an electric toothbrush in front of a water filter
KitchenAid Refrigerator Water Dispenser Troubleshooting - Ready To DIY
KitchenAid Refrigerator Water Dispenser Troubleshooting - Ready To DIY

Once you've located the filter, follow these steps to remove it:

Preparing the Refrigerator

First, turn off the water supply to the refrigerator and turn off the ice maker, if applicable. This will minimize water spills and prevent the ice maker from running during the process. You might need a screwdriver for this part, depending on your model.

Dishwasher repair: clean filter on KitchenAid
Dishwasher repair: clean filter on KitchenAid
How To: Whirlpool/KitchenAid/Maytag Filter Inlet Water Tube Kit 8201597
How To: Whirlpool/KitchenAid/Maytag Filter Inlet Water Tube Kit 8201597

Next, empty any water in the dispenser by holding a container under the dispenser and pressing the water button. This step ensures that there's no old water left in the dispenser when you reinstall the new filter.

Accessing the Filter Housing

Now, locate the filter housing. It should be behind a panel that you can remove using a flathead screwdriver or your fingers, depending on the panel type. Once the panel is off, you should see the filter housing.

AD

If your refrigerator has a reset button or a filter indicator light, take note of its location. You'll need to reset it after installing the new filter.

Removing the Old Filter

Gently grasp the old filter and twist it counterclockwise. You should feel it loosen, and then it should twist out easily. As you remove the filter, use a towel or bowl to catch any remaining water in the housing.

Once the filter is out, discard it responsibly. Many Kitchenaid filters are recyclable, so check your local recycling centers for options.

AD

Installing the New Filter

With the old filter removed, it's time to install the new one. Follow these steps for a smooth installation:

Preparing the New Filter

Before installation, prepare the new filter by removing the protective cap at the top. This cap prevents the filter from leaking during storage and should be removed just before installation. Be careful not to damage the seals around the filter.

Rinse the new filter under cold water for about 10 seconds to remove any residual dust. This step helps to prime the filter and ensures proper water flow.

AD

Installing the New Filter

First, align the new filter with the filter housing. The filter should have an arrow or other marking to indicate which way it should be inserted. Make sure the arrow points in the direction of water flow, usually from the bottom of the refrigerator up.

Gently push the new filter into the housing until it's securely in place. Then, twist the filter clockwise until it's tight, ensuring a proper seal. You should feel some resistance as you twist, but don't force it.

Once the filter is installed, turn the water supply back on and reset the filter indicator or button, if applicable. Run a few gallons of water through the dispenser to fully activate the new filter and flush out any remaining air.

Double-checking Your Work

Finally, check to make sure the water dispenser is working properly. Press the water button and ensure that water flows freely. If the water pressure seems low, try running a few more gallons of water through the system to ensure the filter is fully functioning.

Congratulations! You've successfully removed and replaced your Kitchenaid water filter. By following this guide and changing your filter regularly, you'll ensure fresh, clean water from your refrigerator's dispenser.

As a final tip, set a reminder on your phone or calendar to change your filter every 6 months. Regular maintenance is key to keeping your Kitchenaid refrigerator in top condition. Happy filtering!

AD