how to replace rocker panels without welding

No-Weld Rocker Panel Replacement: DIY Guide

By Rachel Clark
AD

Given the inevitable wear and tear of daily driving, it's not uncommon for rocker panels to rust or get damaged, necessitating replacement. While welding has traditionally been the primary method for reinstalling them, it's not the only option. In this step-by-step guide, we'll explore how to replace rocker panels without welding, ensuring a professional and secure fit.

Apart from being a welding-free alternative, this method offers several advantages, including reduced risk of heat damage, lower repair costs, and a more seamless, factory-like finish. So, let's delve into the process,-equipping you with the necessary skills to tackle this task confidently.

Gathering Tools and Materials

Before embarking on this repair journey, ensure you have all the required tools and materials at your disposal. This will not only streamline the process but also prevent potential delays that could arise from fetching missing items.

AD
How to Glue On Car/Truck Rocker Panels - No Welding!
How to Glue On Car/Truck Rocker Panels - No Welding!
AMD Rocker Panel Replacement = ???‍♂️??
AMD Rocker Panel Replacement = ???‍♂️??
How To Fix Rusty Rockers Without Welding
How To Fix Rusty Rockers Without Welding

Here's a comprehensive list of tools and materials you'll need:

  • New rocker panels
  • Body bond adhesive
  • Self-drilling screws
  • Paint and primer (matching your vehicle's color)
  • Safety glasses
  • Gloves
  • Dremel or grinder
  • Drill
  • Wrenches or pliers
  • Hack saw
  • File or power sanding tool

Preparation: Removing the Old Rocker Panels

Begin by preparing your vehicle for the removal process. This includes ensuring the engine is cool, working in a well-lit, spacious area, and wearing appropriate safety gear.

the underside of a vehicle with two holes in it and an arrow pointing to the side
the underside of a vehicle with two holes in it and an arrow pointing to the side
F150 Rocker Panel Replacement no welding
F150 Rocker Panel Replacement no welding

Next, carefully disconnect the negative battery cable to prevent electrical shorts. Using a wrench or plier, disconnect any bolts or hog rings securing the rocker panel. Then, use a hack saw or grinding tool to cut any welds or rivets that might be present. With the fasteners and welds removed, the old rocker panel should now be ready for extraction.

Prepping the New Rocker Panels and Vehicle Surface

With the old panels gone, it's time to prep the new rocker panels and the vehicle surface for the bonding process. Start by ensuring the new panels are a proper fit. If necessary, make adjustments using a grinder or file, ensuring they match the vehicle's contours perfectly.

AD

Next, thoroughly clean the area where the new panels will be attached, removing any dirt, grease, or rust. Use a degreaser if needed, followed by a thorough rinse and dry. This step is crucial as oils and contaminants can interfere with the bonding process, compromising the integrity of the repair.

Applying Body Bond Adhesive and Installing New Panels

With the preparations complete, it's time to apply the body bond adhesive and install the new rocker panels. This bonding process, though free of welding, results in a strong, secure hold that can last for years.

Start by applying a thin, even layer of body bond adhesive onto the vehicle's surface and the inside of the new rocker panel. Allow the adhesive to sit for a few minutes, enabling it to become tacky. Then, carefully align the new panel, pressing and holding it in place for the recommended time (usually 15-20 minutes), ensuring a strong bond.

AD

Securing the New Rocker Panels with Screws

While body bond adhesive provides a sturdy foundation, adding self-drilling screws will further reinforce the attachment. Using a drill, carefully screw the new panel into place, ensuring you don't drill too deeply and damage the underlying structure.

In close proximity to screw heads, you may encounter holes or punch marks left by original manufacturers. If this is the case, carefully match-drill the new panel to these marks, ensuring the screws' heads are countersunk flush with the panel's surface. This step guarantees a finished look and prevents screws from causing underhood paint chips later on.

Finishing Touches: Painting and Priming

With the new rocker panels securely in place, the final phase involves painting and priming to blend them seamlessly with the rest of your vehicle. Begin by applying a primer, making sure it matches your vehicle's color. This primer layer will not only offer additional protection but also provide an excellent surface for painting.

AD

After the primer has set, apply a paint coat that matches your vehicle's color. Allow this to dry and cure as per the manufacturer's instructions. With these finishing touches applied, your vehicle's rocker panels will look as good as new, restoring its original appearance.

Regularly inspecting your vehicle's rocker panels is key to preserving their longevity and your vehicle's overall aesthetic. However, when the time comes to replace them, you now possess the know-how to undertake this task without welding, ensuring a professional repair that's both cost-effective and durable. Happy repairs!

AD