how to replace kwikset door lock

How to Replace a Kwikset Door Lock: Step-by-Step Guide

By Rachel Lewis
AD

If you're looking to replace a Kwikset door lock, you're in the right place. This comprehensive guide will walk you through the process step-by-step, ensuring a safe and secure new lock for your door.

Before you dive in, make sure you have the right replacement lock. Kwikset offers a wide range of locks, so it's crucial to match your door's style and functionality. This guide assumes you're replacing a Kwikset SAT (Saturn) lock, which is a common type. If your lock is a different model, some steps may vary.

Gather Tools and Disassemble the Old Lock

The first task is to gather your tools and disassemble the old lock. You'll need the following:

AD
How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
260K views · 10K reactions | How To Re-Key Kwikset Smart Key Door Knobs! #diy @kwikset | The Excellent Laborer
260K views · 10K reactions | How To Re-Key Kwikset Smart Key Door Knobs! #diy @kwikset | The Excellent Laborer
How to replace door knobs with Kwikset Levers
How to replace door knobs with Kwikset Levers
  • New Kwikset lock ( ensure it's the same size and type as the old one)
  • Phillips screwdriver
  • Flathead screwdriver
  • Tape measure
  • Hammer (in some cases)

To disassemble the old lock:

  1. Remove the screws on the outer escutcheon (the inner piece) using the Phillips screwdriver.
  2. Pull out the inner piece. This should reveal the latch and the remaining screws holding the outer piece.
  3. Remove the outer escutcheon (the outer piece) and the latch by unscrewing them.

Measure the Door Knobs and Spindle

Before installing the new lock, you need to ensure you have the right size and type of door knobs and spindle. Kwikset SAT locks come in various sizes, so accurate measurement is crucial:

How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
Kwikset Deadbolt and Door Knob Lock Smartkey Installation (How To Install Fast and Easy)
Kwikset Deadbolt and Door Knob Lock Smartkey Installation (How To Install Fast and Easy)
  • Measure the diameter of your existing door knobs. Kwikset SAT locks come in sizes 2-1/8", 2-3/8", 2-1/2", and 2-3/4".
  • Measure the length of the existing spindle from the edge of the door to the center of the inner piece of the lock. Standard lengths are 2-3/4", 3", and 3-1/4".

The new lock should match these measurements exactly.

Prepare the New Lock

Before installing the new lock, prepare it by removing the packing screws and test the lock functionality:

AD
  1. Unscrew the packing screws on the new lock using the flathead screwdriver.
  2. Decorative rings or other additional pieces may be included. If so, attach them according to the installation instructions.
  3. Test the lock mechanism to ensure it's working smoothly.

Install the New Lock

With the old lock removed and the new one prepared, you're ready to install the new lock:

Install the Latch

To install the latch:

  1. Insert the latch into the door edge, ensuring it's fully engaged and sitting flush with the door.
  2. Attach the latch to the door using the provided screws. Tighten them securely but be careful not to overtighten and strip the threads.

Install the Strike Plate

The strike plate is the part of the lock that protrudes from the door frame. To install it:

AD
  1. Hold the strike plate against the door frame and mark the screw holes.
  2. Attach the strike plate to the door frame using the provided screws. The latch should engage smoothly when the door is closed.

Install the Interior and Exterior Escutcheons

To install the inner and outer escutcheons:

  1. Insert the spindle through the appropriate holes in the escutcheons and the door.
  2. Place the outer escutcheon on the outside of the door and attach it using the provided screws. Ensure the keyhole is facing the correct direction.
  3. Place the inner escutcheon on the inside of the door ( ensur the thumbturn is on the inside) and attach it using the provided screws. Ensure the thumbturn is working properly.

With these steps, you've successfully replaced your Kwikset door lock. Regularly test the lock to ensure it's functioning correctly, and always follow manufacturer guidelines for maintaining the lock's longevity.

AD