how to install a kwikset door lock

Step-by-Step Guide: How to Install a Kwikset Door Lock

By Olivia Martin
AD

If you're looking to upgrade your door lock system, you might be interested in the Kwikset SmartKey series. These locks offer advanced security features, like re-keying in seconds, without the need for a locksmith. This guide will walk you through the simple process of how to install a Kwikset door lock, ensuring your home is always locked tight.

Before you start, gather your tools - Kwikset SmartKey lock, philips screwdriver, tape measure, chisel (if you need to adjust the strike plate), and a friend to help hold door alignment. Also, always ensure you buy a lock that fits your door's size and type.

Understanding Your Kwikset SmartKey Lock

First, let's understand the components of your new Kwikset SmartKey lock. The lock will come with a cylinder housing, the SmartKey cylinder itself, a thumbturn, a strike plate (or latch), and screws.

AD
How to Install Kwikset Deadbolt and Door Knob
How to Install Kwikset Deadbolt and Door Knob
How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
Kwikset Deadbolt and Door Knob Lock Smartkey Installation (How To Install Fast and Easy)
Kwikset Deadbolt and Door Knob Lock Smartkey Installation (How To Install Fast and Easy)

Your Kwikset SmartKey lock comes with two keys. The first is your operational key, and the second is your master key, which can re-key your lock anytime you want to change the lock combination.

Preparing Your Door and Lock

Before installation, ensure your door is in good condition and aligns properly in its frame. Place your new lock in position, marking the drill points. The drill bit should be 2-1/8" for most doors, but if your door is thick or made of oak, you might need a longer bit.

DIY Kwikset Deadbolt and Door Lock Installation
DIY Kwikset Deadbolt and Door Lock Installation
260K views · 10K reactions | How To Re-Key Kwikset Smart Key Door Knobs! #diy @kwikset | The Excellent Laborer
260K views · 10K reactions | How To Re-Key Kwikset Smart Key Door Knobs! #diy @kwikset | The Excellent Laborer

Clear the drill point by removing any paint or varnish, and drill the holes using a slow, steady pressure. Wipe away any debris, then test the fit of your new lock. If it's too tight, use a chisel to carefully enlarge the mortise.

Installing the Latch

Insert the latch into the door edge first, aligning it with your drill hole. Thread the latch bolt through the faceplate and into the backset of the door. The latch should be flush with the edge of the door.

AD

Insert the tailpiece through the latch. If your lock is a deadbolt, thread the deadbolt's cam through the faceplate, followed by the tailpiece. Use a flathead screwdriver to tilt the tailpiece and secure the latch in place. For a single cylinder lock, secure the tailpiece with the set screw.

Installing the Cylinder Housing and Lock

Position the cylinder housing into the mortise cutout. The housing should overlap the latch edge by about a 1/4". Locate the mounting screws, drill pilot holes, then attach the housing to the door using the provided screws.

Insert the SmartKey cylinder into the housing from the faceplate side. Push it firmly into place until it's secure - you should hear it click. Ensure the backsideuts of the cylinder match up with the tailpiece of the latch.

AD

Mounting the Thumbturn

The thumbturn rotates the inside latch. Position the thumbturn on the side of the cylinder housing, aligning it with the slot on the tailpiece. Thread the set screw through the thumbturn and into the slot.

You can re-key the lock at any time using the SmartKey re-key tool and the master key. Remember, re-keying invalidates the original keys, so keep them safe.

Fixing the Strike Plate

The strike plate guides the latch into the frame and keeps your door from rattling. Measure and mark the strike plate position on the frame, then secure it using the provided screws. Ensure the strike plate is level and securely fitted.

AD

Test your new Kwikset SmartKey lock. With both the exterior key and the thumbturn, ensure they operate smoothly. Make any necessary adjustments, and you're done!

Regular maintenance is key to keeping your Kwikset SmartKey lock working optimally. Periodically check for any debris in the latch mechanism, and lubricate it with a light spray of WD-40. Enjoy the peace of mind that comes with a secure, user-friendly Kwikset SmartKey lock system!

AD