how to replace kwikset deadbolt

How to Replace a Kwikset Deadbolt

By Michael Jones
AD

Whether you've misplaced your keys or want to enhance your home's security, knowing how to replace a Kwikset deadbolt can be a handy skill. Kwikset, a well-known brand in residential door hardware, offers a variety of deadbolts to suit different needs. This guide will walk you through the process of replacing a standard Kwikset deadbolt, step by step.

Before you begin, ensure you have the necessary tools and a new Kwikset deadbolt that's compatible with your door. You'll need a Phillips screwdriver, a drill (if the existing screw holes don't line up), and some time dedication. Since there are various Kwikset deadbolt models, always double-check the compatibility of your new deadbolt with your door.

Preparation and Removing the Old Deadbolt

As with any DIY project, preparation is key. Gather your tools and make sure your new deadbolt is the correct fit for your door. Match the measurements of the original deadbolt, specifically the inches between the centerline of the keyway to the centerline of the latch.

AD
How do I remove a Kwikset deadbolt with no screws on the inside plate?
How do I remove a Kwikset deadbolt with no screws on the inside plate?
Kwikset Deadbolt and Door Knob Lock Smartkey Installation (How To Install Fast and Easy)
Kwikset Deadbolt and Door Knob Lock Smartkey Installation (How To Install Fast and Easy)
How to Rekey a Kwikset Deadbolt Lock
How to Rekey a Kwikset Deadbolt Lock

To remove the old deadbolt, start by unlocking the door. Using your Phillips screwdriver, remove the two screws on the interior side of the door. This should allow you to separate the deadbolt assembly from the door.

Disconnecting the Latch and Thumb Turn

Before disconnecting the latch and thumb turn, ensure the door is in the unlocked position. Hold the latch steady with one hand and use the other to turn the thumb turn clockwise. This should unscrew it from the latch. Once unstuck, pull the thumb turn out of the latch.

How To Replace And Install Deadbolt And Door Knob Handle Assembly (KWIKSET Handleset) | EASY DIY!
How To Replace And Install Deadbolt And Door Knob Handle Assembly (KWIKSET Handleset) | EASY DIY!
260K views · 10K reactions | How To Re-Key Kwikset Smart Key Door Knobs! #diy @kwikset | The Excellent Laborer
260K views · 10K reactions | How To Re-Key Kwikset Smart Key Door Knobs! #diy @kwikset | The Excellent Laborer

Next, locate the latch retainer pin located at the bottom of the latch. Using your screwdriver, push the pin out and ensure the latch is free to release from the door edge.

Removing the Faceplate and Deadbolt

With the latch and thumb turn removed, you can now pry off the faceplate. Kwikset's faceplates are typically held in place by small clips. Using a flathead screwdriver, gently pry the faceplate off.

AD

Now, you can remove the deadbolt itself. This should simply slide out once the faceplate and other components are removed. If it's stuck, try wiggling it gently to release any debris or lubricant buildup.

Installing the New Kwikset Deadbolt

Before installing the new deadbolt, ensure all components match correctly. Most Kwikset deadbolts come with the same components, but it's always worth a double-check.

The new deadbolt should be wider than the door edge by about 1/8 inch. If not, you might need to bore a new hole in the door using the appropriate size drill bit.

AD

Installing the Deadbolt Faceplate

Begin by inserting the deadbolt through the faceplate. Ensure the deadbolt and faceplate are configured to match the handedness of your door (left or right-hand door).

Position the new deadbolt and faceplate assembly against the door edge, then mark the screw holes if they don't line up with the existing ones. Drill new holes if necessary, then secure the assembly with the provided screws.

Securing the Latch and Thumb Turn

Insert the latch through the door edge, ensuring the latching mechanism aligns with the door frame. Secure the latch using the provided retainer pin.

AD

Next, insert the new thumb turn through the interior side of the door. Ensure it fits snugly around the latch and matches your door's handedness. Push the thumb turn onto the latch until it snaps into place. Use your screwdriver to secure the thumb turn by turning it counterclockwise.

Testing the New Deadbolt

Before securing the deadbolt with the providedgat,” e

Finally, test the new deadbolt to ensure it locks and unlocks smoothly from both the keyway and thumb turn. If everything works as expected, your Kwikset deadbolt replacement is complete!

Now that you've mastered the art of replacing a Kwikset deadbolt, consider exploring other home improvement projects. Always remember, safety first, and if you're ever unsure, don't hesitate to consult a professional."

AD