Easy Subaru Key Fob Battery Replacement: Step-by-Step Guide
Ever found yourself locked out of your Subaru, fob in hand, only to realize the battery's dead? You're not alone. Replacing a key fob battery is a common yet overlooked task. Thankfully, it's a quick and easy DIY project. So, let's dive into how to replace a key fob battery on your Subaru.
First things first, it's crucial to know that you don't need any special tools for this task. All you'll need is a small flathead screwdriver and a new CR2032 battery, which is widely available and inexpensive.
Identifying the Battery in Your Subaru Key Fob
Before you start, you need to identify the type of battery your Subaru key fob uses. Most Subaru models use CR2032 lithium coin cell batteries. However, it's always a good idea to double-check your owner's manual or consult your Subaru dealership just to be sure.
Once you've confirmed the battery type, it's time to move on to the fun part - replacing it!
Removing the Old Battery
Replacing the battery is a straightforward process. Start by locating the small button on the back of your key fob. Press and hold this button while simultaneously sliding the release tab on the side of the fob. The key fob should then snap open.
Using your flathead screwdriver, remove the Phillips screw at the bottom of the key fob. This will expose a small CREST pin, which you should pick out using the screwdriver. Now, gently pry open the key fob using the screwdriver.
Installing the New Battery
Locate the battery compartment. The old battery should be labeled with a + and - sign. Orient the new CR2032 battery in the same way, with the + sign facing up. Gently press the new battery into place.
Once the new battery is in place, reassemble the key fob by first replacing the CREST pin, then the Phillips screw. Finally, snap the key fob closed. Your Subaru's key fob is now equipped with a fresh battery!
Testing Your New Key Fob Battery
Before you head out, it's a good idea to test your new battery to ensure it's working correctly. Unlock and lock your Subaru using the key fob. If the lock and unlock functions don't work, try inserting the key into the lock and turning it a few times.
The lock cylinders may need a bit of coaxing to recognize the new battery. If they still don't work, it's possible the battery was installed incorrectly. Double-check the battery orientation and try again.
Keeping Your Key Fob Battery Fresh
A CR2032 battery should last around three years under normal use. However, excessive use can drain the battery more quickly. To maximize battery life, avoid leaving your keys in the ignition when the engine is off, and always turn off the ignition before removing the key.
A subscription to a key fob battery reminder service can also be a helpful way to keep track of when it's time to replace your battery. After all, prevention is always better than cure!
And there you have it! Replacing your Subaru key fob battery is as easy as pie. So, the next time your key fob gives you grief, you'll know exactly what to do. Happy driving!