how to replace key fob battery ford

"Revive Your Ford: A Step-by-Step Guide to Replace Your Key Fob Battery"

By Ashley Rodriguez
AD

Locking and unlocking your Ford car with a key fob has made life easier, but like all batteries, the one in your key fob will run out of juice sometime. When that happens, don't panic. Replacing the battery is a simple task that you can perform at home. This guide will walk you through the process, making it a breeze to get back on the road.

Before we dive in, assure yourself that your key fob's battery is indeed the culprit. If your car doesn't respond when you press the buttons, but the car's interior lights or trunk light up when you press the unlock button, it's likely a battery issue. Let's tackle this step by step.

Understanding Your Ford Key Fob

First, familiarize yourself with the key fob components. The small, removable part is the key, while the larger piece with buttons is the fob. The fob houses the battery that powers the remote locking and unlocking features. Knowing this will help you identify what you need to replace.

AD
2013 - 2016 Ford Fusion Remote Key Fob Battery Change - How To Remove Replace Ranger Key Batteries
2013 - 2016 Ford Fusion Remote Key Fob Battery Change - How To Remove Replace Ranger Key Batteries
How to Change the Battery in Your Car Key Fob
How to Change the Battery in Your Car Key Fob
How to Change the Battery in Chevrolet Key Fob | Chevy Traverse #keyfob #battery #chevrolet
How to Change the Battery in Chevrolet Key Fob | Chevy Traverse #keyfob #battery #chevrolet

Depending on your Ford model, your key fob might use one of the following battery types:

  • CR2032 or CR1616 (most common)
  • CR2025
  • CR2016

CR2032 and CR1616 Batteries

The CR2032 and CR1616 batteries are the most common in Ford key fobs. They are coin cell batteries and can be found at most electronic stores. Ensure you get the right size as they are not interchangeable.

How To Replace A 2018 - 2024 Ford Explorer Key Battery - Change Replacement Remote Fob Batteries
How To Replace A 2018 - 2024 Ford Explorer Key Battery - Change Replacement Remote Fob Batteries
the text subaru key fob tips programming how to open replace battery
the text subaru key fob tips programming how to open replace battery

Check your Ford's owner manual for the specific model and year to confirm which batteries your key fob uses. If you're uncertain, take the old battery to a store and they can match it.

CR2025 and CR2016 Batteries

Although less common, some Ford models do use these batteries. They are also coin cell batteries but have slightly different dimensions from the CR2032 and CR1616. Again, ensure you replace them with the correct type.

AD

The CR2025 is slightly larger than the CR2016, so it's crucial to get the size right to prevent malfunctioning or even damaging the key fob.

Replacing the Battery

Now that you have the correct battery, it's time to replace it. Here's a step-by-step guide:

Preparation

You'll need a small flathead screwdriver, tweezers, and the new battery. Some Ford models might require you to use the key to unlock the fob casing. If so, carefully insert the key and turn gently until the case pops open.

AD

For other models, you might find a small hole where you can insert your screwdriver and gently pry open the case. Be careful not to break the plastic casing or cause damage.

Removing the Old Battery

Once the case is open, you'll see the battery. Carefully use your tweezers to remove it. Some batteries might be taped down; if so, gently lift the tape off without pulling too hard on the battery.

After removing the old battery, ensure the contacts are clean. If they are not, gently wipe them with a cotton swab dipped in rubbing alcohol. This helps maintain a good connection with the new battery.

AD

Inserting the New Battery

Before inserting the new battery, ensure it's inserted correctly. The side with a plus (+) sign should face up. If it's backward, it can damage the key fob or even cause electrical shorts.

Carefully insert the new battery, ensuring the flat side is facedown on the contact. Once it's in place, gently put the fob casing back together. Make sure it's properly aligned and snaps shut. For models that use the key to lock and unlock, turn the key gently until it locks or unlocks.

Testing the New Battery

Now, test the new battery. Press the lock and unlock buttons on the key fob. The car should respond as it usually does. If it doesn't, double-check that the battery is correctly inserted and the contacts are clean.

If your Ford has a remote start feature, test that as well. If everything works correctly, the battery has been successfully replaced.

Additional Tips

Here are some tips to ensure the longevity of your key fob battery:

Store Correctly

Store your keys in a dry, cool place away from extreme temperatures. This helps preserve the battery life.

Avoid storing them near other keys, as magnetic fields from other keys can drain the battery faster. Also, keep them away from electronic devices as they too can interfere with the battery.

Find the Sweet Spot

To avoid excessive battery use, find the 'sweet spot' for transmission range. This is the point where you're the closest to your car when the signal is still strong enough to unlock or lock the doors.This reduces unnecessary battery drainage.

If your Ford model has a 'Panic Button' or 'CarFinder' feature, avoid using them excessively as they also drain the battery faster.

There you have it! Replacing the battery in your Ford key fob is a simple task that you can manage on your own. Regularly checking the battery ensures you're never stranded with a car that won't start or lock. So, the next time your battery runs out, don't let it catch you off guard – be ready with a replacement, and you'll be back on the road in no time. Happy driving!"

AD