how to replace hubcap

Easy Hubcap Replacement: Step-by-Step Guide

By Robert King
AD

Ever found yourself on the road with a dented, scratched, or missing hubcap? Before you stress about towing your vehicle to a professional, know that replacing a hubcap is a straightforward task you can accomplish in your own driveway. Here's a step-by-step guide on how to replace a hubcap, ensuring your vehicle looks as good as new.

Replacing a hubcap isn't just about aesthetics; it also prevents underlying damage to your wheel bearings and helps maintain your vehicle's value. So, let's dive into the process, breaking it down into manageable subtopics to ensure a stress-free experience.

Gather Your Tools and Materials

The first step is to ensure you have all the necessary tools and materials at hand. This will save you time and ensure a smooth process.

AD
a woman kneeling down next to a car tire
a woman kneeling down next to a car tire
Hypermiler Flat Hubcaps
Hypermiler Flat Hubcaps
How to Remove a Plastic Wheel Cover (hubcap)
How to Remove a Plastic Wheel Cover (hubcap)

Here's what you'll need:

  • A flathead screwdriver
  • A hammer (optional, for stubborn clips)
  • The new hubcap
  • Wheel wedges or jack stands (for safety)
  • Car lift (if available, for better access)

Understand Your Hubcap's Retention System

Before you begin, familiarize yourself with your hubcap's retention system. Most hubcaps use one of three retention systems:

Hubcap Flower Tutorial
Hubcap Flower Tutorial
someone is fixing the wheel on their car
someone is fixing the wheel on their car
  1. Push-on retention: These hubcaps simply snap into place and can often be removed with a flathead screwdriver.
  2. Lug nut retention: These hubcaps have a threaded center hole that screws onto the lug nut, similar to a wheel cover.
  3. Clips or retaining rings: Some hubcaps are secured by clips or retaining rings that you'll need to remove before taking off the old hubcap.

Safety First: Secure Your Vehicle

Before lifting your vehicle, ensure it's on a level surface and is secure. You can use wheel wedges to prevent it from rolling, or if you have a lift or jack stands, use them for better stability and access.

Removing the Old Hubcap

Now that you're set up, it's time to remove the old hubcap. The process will vary slightly depending on your hubcap's retention system, but here's a general outline:

AD

Start by using a flathead screwdriver to pry the edge of the hubcap. If it's a push-on retention, you should be able to wiggle it loose. If it's stuck, you might need to tap it gently with a hammer to break the suction.

If your hubcap is secured by clips or retaining rings, you'll need to locate these and remove them. This might involve using a flathead screwdriver to pry them out or a pair of pliers to squeeze them together and release them.

Removing Lug Nut Retention Hubcaps

For hubcaps secured by a lug nut, you'll first need to remove the lug nut using a lug wrench. Once the lug nut is removed, the hubcap should pull straight off.

AD

If your hubcap is particularly stubborn, don't be tempted to force it. Instead, take a break, inspect the retention system again, and try a different approach.

Installing the New Hubcap

With the old hubcap removed, it's time to install the new one. The process is largely the reverse of removal, but with a few key differences:

For push-on retention hubcaps, start by wiggling the new hubcap into place. You might need to use a little force, but be careful not to bend or warp the hubcap. Once it's seated, give it a good tug to ensure it's secure.

AD

If your new hubcap is secured by clips or retaining rings, you'll need to install these as you go. Make sure they're properly seated to prevent the hubcap from falling off.

Installing Lug Nut Retention Hubcaps

For lug nut retention hubcaps, start by threading the hubcap onto the lug nut by hand. Once it's on, use a wrench to tighten it snugly. Be careful not to overtighten, as this could strip the threads or damage the hubcap.

It's a good idea to check your vehicle's owner's manual to ensure you're installing the new hubcap correctly, especially if it's a different style or type from the original.

Finishing Up

With the new hubcap installed, give it a little pull to ensure it's secure. If it's still wobbly, you might need to adjust the retention system or try a different method to secure it.

Once you're satisfied that your new hubcap is secure, lower your vehicle and remove the wedges or jack stands. Give your vehicle a quick once-over to ensure everything is in order, and you're ready to hit the road with your new hubcap.

Replacing a hubcap might seem daunting at first, but with the right tools and a little patience, it's a task you can accomplish with ease. Whether you're repairing damage or personalizing your vehicle, a new hubcap can make a world of difference. Drive safe and happy hubcap replacing!

AD