how to replace ez pass battery

Refresh Your Commute: DIY Ez Pass Battery Replacement

By Sarah Miller
AD

Nothing's more frustrating than a low battery indicator on your E-ZPass® transponder, especially when you're cruising down the highway. Don't worry, replacing the battery is a straightforward and affordable fix. Let's guide you through the process with this step-by-step guide.

Before we dive in, note that E-ZPass batteries typically last about four to five years. However, factors like frequency of use, temperature, and storage conditions can affect battery life. With that said, let's get started.

Identifying Your E-ZPass Battery

First, you need to identify the type of E-ZPass you have. Most E-ZPass transponders use a type of battery - a CR2032 coin cell, size 20, 3V. This battery is about the size of a quarter and can be replaced easily.

AD
EZ BATTERY RECONDITIONING PROGRAM. HOW DOES IT WORK
EZ BATTERY RECONDITIONING PROGRAM. HOW DOES IT WORK
Elvie Pump - Battery Replacement (and Right to Repair/Reuse Discussion for Designers)
Elvie Pump - Battery Replacement (and Right to Repair/Reuse Discussion for Designers)
Ford Escape (2013-2019) - New Battery Install
Ford Escape (2013-2019) - New Battery Install

For some rare cases, you might have an earlier generation transponder using a 3V CR2016 coin cell. While this guide focuses on the CR2032 battery, the process for CR2016 is similar.

Inspecting Your Transponder

Before replacing the battery, check your transponder for a small label that indicates its type. The label might read "CR2032" or "CR2016". Alternatively, you can look up your account details with your E-ZPass provider as they may specify the battery type on their website.

EZ Battery Reconditioning Review - Little Known Way To Bring Nearly ANY Dead Battery Back To Life
EZ Battery Reconditioning Review - Little Known Way To Bring Nearly ANY Dead Battery Back To Life
How replace your AirTag’s battery: Expert tips | CNN Underscored
How replace your AirTag’s battery: Expert tips | CNN Underscored

orem, you can determine the battery type by examining the transponder's size. CR2032 transponders are larger and typically 5/8" wide x 3/4" tall, while CR2016 transponders are smaller, about 3/4" wide x 1/2" tall.

Gathering Materials

Before you begin, grab a coin cell battery that matches your transponder's type (CR2032 or CR2016), a flathead screwdriver, tweezers, and a small piece of thin cardboard or a steady hand for battery replacement.

AD

In most cases, you can purchase replacement batteries from local electronic stores or online retailers. Always ensure you buy batteries from reputable vendors to avoid counterfeits.

Replacing the Battery

Now that you've identified your battery type and gathered your tools, it's time to replace the old battery.

First, carefully remove the back casing of your transponder using the flathead screwdriver. Be gentle to avoid damaging the internal components. Once the casing is removed, you should see the battery nestled inside.

AD

Removing the Old Battery

The battery will be held in place with adhesive. To remove it, use tweezers to gently pull the battery out. If necessary, you can use a small piece of thin cardboard or a steady hand to firmly but carefully peel the battery off the adhesive.

The positive side of the battery, marked with a "+" sign, should face up when it's inserted. If you're having trouble finding the "+" sign, simply flip the battery over to see if it fits more easily in one position.

Inserting the New Battery

Position the new battery with the positive side facing up. If the battery doesn't fit easily, make sure you're using the correct battery type and there are no cracks or bumps on the battery case.

AD

Once the battery is in place, use your flathead screwdriver to replace the back casing. Be careful not to bend any internal components or damage the new battery during reassembly.

Testing Your New Battery

After replacing the battery, it's essential to test your E-ZPass to ensure it's working correctly.

To test, drive through a tolled lane with your E-ZPass in its usual position. Check your account statements or contact your E-ZPass provider to confirm that your transponder was read and the correct toll was deducted.

Re Belfast Your E-ZPass

Now that your E-ZPass has a fresh battery, make a note on your calendar to replace the battery in about four to five years. Regularly checking your E-ZPass's battery life and replacing it when needed helps prevent unexpected drops in service.

Furthermore, keep your E-ZPass away from extreme temperatures, moisture, and magnetic fields to extend your battery's life.

It's natural to feel a sense of accomplishment when you've replaced your E-ZPass battery successfully. You've not only saved yourself the hassle of a potential breakdown on the road but also acquired a new skill for future use. Safe travels!

AD