how to replace exit sign battery

Step-by-Step: Replacing Your Exit Sign Battery

By Robert Robinson
AD

Ensuring safe evacuation during emergencies is paramount, and one of the critical components of your building's exit safety system is the exit sign battery. Over time, these batteries lose their charge and need replacement to ensure continued functionality and safety compliance. Here's a step-by-step guide on how to replace your exit sign battery.

Before we dive into the process, it's crucial to ensure you have the right battery for your exit sign. Exit signs typically use either AA, C, or D cell batteries, depending on the model. Always check your exit sign's user manual or contact the manufacturer if you're unsure about the battery type.

Safety First: Preparing for the Battery Replacement

Before you start, ensure you understand the safety measures to undertake. Replacing batteries in exit signs involves working with electrical components, so you should turn off the power to the sign at the circuit breaker to avoid electrical shocks.

AD
How to Install Exit Sign Light
How to Install Exit Sign Light
What Should You Do When an Exit Light Stops Working | By Kord Fire
What Should You Do When an Exit Light Stops Working | By Kord Fire
Tritium Exit Signs: The Ultimate Guide for Enhanced Safety and Reliability
Tritium Exit Signs: The Ultimate Guide for Enhanced Safety and Reliability

After turning off the power, you should also secure the area around the exit sign to prevent accidents. You can use caution tape or inform nearby personnel about the maintenance work in progress.

Gathering Necessary Tools and Materials

The tools and materials required for this task are minimal and easy to assemble. Here's what you'll need:

Garrini LED Emergency Exit Sign with Backup Battery UL Certified Wall Ceiling Mounting Acrylic Clear Replaceable Panel Removable Indicator Arrows, Fire Resistant GSEL-200SR
Garrini LED Emergency Exit Sign with Backup Battery UL Certified Wall Ceiling Mounting Acrylic Clear Replaceable Panel Removable Indicator Arrows, Fire Resistant GSEL-200SR
TEST EMERGENCY LIGHTS AND EXIT SIGNS
TEST EMERGENCY LIGHTS AND EXIT SIGNS
  • New batteries (ensure they're the correct type and size for your exit sign)
  • Screwdriver (typically a Phillips or flathead screwdriver, depending on your exit sign's fasteners)
  • Voltage tester (optional but recommended to ensure the power is off)

Removing the Old Battery

Once you've gathered your tools and materials, it's time to remove the old battery from your exit sign.

First, use your screwdriver to remove the cover or the back panel of the exit sign. The process might vary slightly depending on the model, but it usually involves unscrewing screws or depressing retaining clips.

AD

Installing the New Battery

Now that the old battery is removed, it's time to insert the new one. Ensure the new battery is fully charged and has the correct polarity.

Positive and negative symbols are usually marked on the exit sign's battery compartment to guide you in inserting the battery correctly. Most batteries have a plus (+) sign on one side and a minus (-) sign on the other. Make sure the battery's polarity matches these signs.

Inserting the New Battery

Gently insert the new battery into the battery compartment. Make sure the battery is facing the correct direction according to the signs and is securely seated.

AD

Once the battery is inserted, it's time to reassemble the exit sign. Carefully reattach the cover or the back panel you previously removed, ensuring all screws are securely tightened or retaining clips are properly engaged.

Restoring Power and Testing the Exit Sign

After reassembling the exit sign, it's now time to restore power and test your newly installed battery.

Turn the circuit breaker back on to restore power to the exit sign. After a few seconds, the exit sign should illuminate. If it does, congratulations, you've successfully replaced the battery! If it doesn't, double-check your work and ensure the new battery is fully charged and inserted correctly.

AD

Regular maintenance and battery replacement are crucial to ensure your building's exit signs remain functional and compliant with safety regulations. Always have spare batteries on hand to minimize downtime in case of failures.

Finally, schedule periodic inspections of your exit signs to ensure they remain in optimal working condition. This proactive approach will help prevent any unexpected failures and ensure the safety of your building's occupants during emergencies.

AD