how to replace belt on shark navigator

Step-by-Step: Replace Belt on Shark Navigator

By Rachel Thompson
AD

Is your Shark Navigator vacuum cleaner not performing up to par? A worn-out or slipped belt could be to blame. Replacing the belt is an easy fix, and here's a step-by-step guide to help you do it yourself. In this comprehensive guide, we'll walk you through the process, from gathering the necessary tools to successfully installing the new belt.

Before we dive into the process, it's crucial to identify the type of belt your Shark Navigator uses. Shark offers two types of belts: the V-belt and the Q-belt. V-belts are wide and have a trapezoidal cross-section, while Q-belts are narrower and have a rectangular cross-section. Make sure to purchase the correct belt to ensure proper functioning of your vacuum.

Gathering Your Tools and Materials

Before you start, you'll need to gather a few tools and materials.Fortunately, the process doesn't require any specialized equipment. Here's a list of what you'll need:

AD
how to change belt on skark
how to change belt on skark
Shark Navigator Lift Away, Do You Know Why A Shark Keeps Moving, How To Replace Shark Vacuum Battery, Shark Navigator Lift Away Manual, Shark Navigator Parts, How To Support Shark Conservation, Shark Navigator Vacuum Parts, Shark Vacuum Battery Replacement Cost, Shark Attacks Real
Shark Navigator Lift Away, Do You Know Why A Shark Keeps Moving, How To Replace Shark Vacuum Battery, Shark Navigator Lift Away Manual, Shark Navigator Parts, How To Support Shark Conservation, Shark Navigator Vacuum Parts, Shark Vacuum Battery Replacement Cost, Shark Attacks Real
How to Easily Change the Belt on Shark Navigator: A Step-by-Step Guide - Vacuum Post
How to Easily Change the Belt on Shark Navigator: A Step-by-Step Guide - Vacuum Post

  • New Shark Navigator belt (ensure it's the correct type for your model)
  • Screwdriver (usually a Phillips-head, but check your model)
  • Flathead screwdriver
  • Needle-nose pliers

JOYBUY Replacement Belt for Shark NV350 NV351 NV352 NV355 Series Vacuum Cleaner for Shark Navigator Lift-Away Pro 2 Pack
JOYBUY Replacement Belt for Shark NV350 NV351 NV352 NV355 Series Vacuum Cleaner for Shark Navigator Lift-Away Pro 2 Pack
Brush Roll Belt Filter Replacement For Shark Navigator Lift Away Nv350 Nv351 ...
Brush Roll Belt Filter Replacement For Shark Navigator Lift Away Nv350 Nv351 ...

Locating the Belt

Before you can replace the belt, you need to locate it. On Shark Navigator vacuums, the belt is hidden beneath a panel. Here's how to access it:

AD
  1. Unplug your Shark Navigator from the power source.
  2. Remove the dust canister by pressing the release button and lifting it off.
  3. Locate the panel near the bottom of the vacuum, just above the wheels. It's usually held in place by screws or clips. Use the screwdriver or flathead to remove the screws or carefully pry it off with the flathead if it's clipped in.

Removing the Old Belt

With the panel removed, you should now see the old belt. Here's how to remove it:

AD
  1. Use the needle-nose pliers to carefully pull the ends of the belt off the pulleys. The belt should slip off easily, but if it's stuck, you can gently use the pliers to pry it off.
  2. Discard the old belt. It's a small part that doesn't warrant recycling.

Installing the New Belt

Now that the old belt is out of the way, it's time to install the new one. Follow these steps:

AD
  1. Take the new belt and loop it around the larger pulley (usually the one connected to the motor).
  2. Hold the belt in place with one hand, then use the other hand to loop it around the smaller pulley (the one connected to the brush roll).
  3. Pull the belt taunt to ensure it's securely on both pulleys. You should see one or two labels on the belt - make sure they're facing outwards.
  4. Use the needle-nose pliers to carefully pull the belt ends over the ridges on the pulleys. The belt should now be securely in place.

Reassembling Your Shark Navigator

With the new belt installed, it's time to put your Shark Navigator back together:

  1. Replace the panel you removed earlier. If it was held in place by screws, use the screwdriver to secure it. If it was clipped in, make sure it's properly seated and snapped back into place.
  2. Reattach the dust canister by lining up the arrows and pressing it firmly into place until you hear it click.
  3. Plug your Shark Navigator back into the power source.

Testing Your Vacuum

Before you begin using your vacuum again, it's a good idea to test the new belt:

  1. Turn on your Shark Navigator.
  2. Check that the brush roll rotates freely. If it does, your new belt is properly installed and your vacuum should be working as good as new.
  3. If the brush roll isn't rotating, turn off your vacuum and check that the belt is securely on both pulleys. If it still doesn't work, you may need to contact Shark Customer Support for further assistance.

And there you have it - your Shark Navigator is now equipped with a fresh, new belt and ready to tackle your floors' dirtiest jobs. With proper maintenance and occasional belt replacement, your vacuum should serve you well for many years to come. Happy cleaning!

AD