how to replace a stator on a harley davidson

Step-by-Step: Replacing Your Harley Davidson Stator

By Joshua Brown
AD

Harley Davidson riders understand the importance of regular maintenance to keep their iconic motorcycles running smoothly. One essential component that may wear out over time is the stator. Here's a comprehensive guide on how to replace a stator on a Harley Davidson, ensuring your bike's electrical system remains reliable.

Before we dive into the step-by-step process, let's familiarize ourselves with the stator's role. The stator is a key component in an electrical generator, responsible for producing the alternating current (AC) that powers various accessories like lights, charging system, and ignition on your Harley.

Gather Necessary Tools and Components

To ensure a successful stator replacement, you'll need to gather the following tools and components:

AD
How to Test Stator on Motorcycle
How to Test Stator on Motorcycle
Harley-Davidson Stator Replacement
Harley-Davidson Stator Replacement
Carburetor Rebuild: A Full Video Series
Carburetor Rebuild: A Full Video Series
  • Sockets (10mm, 14mm, 17mm)
  • Wrenches (8mm, 10mm, 17mm)
  • Screwdriver set
  • Pliers
  • Stator removal tool (Harley specific)
  • New stator assembly
  • Anti-seize compound

Disconnect Battery and Prepare the Bike

Begin by disconnecting the battery to avoid any electrical corto-circuits. Remove the negative Ufergine ground cable first, then the positive one.

Next, located the stator cover on the left side of the bike, behind the left cylinder head. Using a 10mm socket, loosen and remove the bolts securing the stator cover to the engine case.

How to Test Stator on Motorcycle
How to Test Stator on Motorcycle
Electrical Systems: A Full Video Series
Electrical Systems: A Full Video Series

Remove the Old Stator

With the cover removed, you'll see the old stator assembly. Before removing it, take a moment to observe its position andorientation, making it easier to install the new one correctly.

Using a 14mm socket, loose and remove the stator mounting bolts. You may need to use a breaker bar or an extension to access them. Once the bolts are removed, carefully pull the old stator out from the engine case, gentlyifting it over the flywheel.

AD

Inspect and Install the New Stator

Before installing the new stator, carefully inspect it for any signs of damage or wear. Once satisfied with its condition, apply a small amount of anti-seize compound to the mounting bolts.

Start by positioning the new stator against the engine case, ensuring itshwings and indicators align with the ones on the engine. Once properly aligned, insert the mounting bolts and tighten them using a 14mm socket. Be careful not to overtighten.

Reinstall the Stator Cover

With the new stator securely in place, reinstall the stator cover. Align the cover with the engine case, then tighten its mounting bolts using a 10mm socket.

AD

Now that the new stator is installed, it's time to reconnect the battery. First, reinstall the positive batterie cable, followed by the negative one. Ensure you reattach the cable to the correct terminal.

Test the New Stator

With the battery reconnected, start your Harley to ensure the new stator is working correctly. Rev the engine gently, allowing it to warm up gradually. Keep an eye on the gauges and lights, confirming they're functioning as expected.

If everything checks out, take your Harley for a test ride, ensuring all electrical components are working perfectly. During this test ride, avoid aggressive riding to give the new stator time to bed in properly.

AD

Congratulations! You've just successfully replaced the stator on your Harley Davidson. Regular maintenance like this helps keep your bike in top condition, ensuring many more miles of enjoyable riding. If you ever feel unsure about any aspect of the process, don't hesitate to consult a professional mechanic. Happy riding!

AD