how to replace a rocker light switch

How to Replace a Rocker Light Switch

By William Wilson
AD

Are you tired of flickering or non-functioning lights in your home's exterior? Replacing a rocker light switch might just be the solution you're looking for. Despite the name, these switches are not that difficult to work with. In this guide, we will walk you through the step-by-step process, ensuring you get the job done safely and efficiently.

Before we dive in, remember that electrical work can be dangerous. Always ensure the power is turned off at the circuit breaker, and used appropriate safety tools. If you're unsure about any step, don't hesitate to call a professional electrician.

Determine the Type of Rocker Switch

Before you head to the store, you need to know what type of rocker switch you'll be replacing. There are three main types: Single Pole, Single Throw (SPST), Single Pole, Double Throw (SPDT), and Three-Way Switches.

AD
Safe Electrical DIY: 10 Alternate Steps to Replace a Light Switch
Safe Electrical DIY: 10 Alternate Steps to Replace a Light Switch
How to Replace a Toggle Style Light Switch With a Rocker Style Light Switch
How to Replace a Toggle Style Light Switch With a Rocker Style Light Switch
How to Replace a Light Switch or Outlet Safely and Easily
How to Replace a Light Switch or Outlet Safely and Easily

The most common are SPST and SPDT. SPST switches control a single light or fixture, while SPDT switches let you control two different fixtures with one switch. Three-way switches allow you to control a light from two different locations.

Identifying Rocker Switch Types

To identify your switch, turn off the power, remove the switch plate, and see if there's a label on the switch. Alternatively, count the screws. SPST switches usually have one screw, SPDT have two, and three-way switches have three or four screws.

an electrical outlet is shown with the words changing a light switch
an electrical outlet is shown with the words changing a light switch
Replace Toggle Switch with Modern Rocker | Swap Light Switch | 'Load', 'Ground, and 'Line' Explained
Replace Toggle Switch with Modern Rocker | Swap Light Switch | 'Load', 'Ground, and 'Line' Explained

If you're still unsure, take a picture of the switch and show it to a sales associate at your local hardware store. They can help you identify the type and recommend a replacement.

Gather Your Tools and Materials

Now that you know which type of switch you need, let's gather the tools and materials required for the job:

AD
  • A new rocker light switch
  • Screwdriver (flathead or Phillips, depending on your switch's screws)
  • Wire strippers
  • Needle-nose pliers
  • Electrical tape
  • Wire connectors (wire nuts)

Ensure you have the correct size and type of wire nuts for your wires. Typically, 12-14 AWG electrical wire is used in home lighting fixtures.

Replacing the Rocker Light Switch

Now that you have everything you need, it's time to replace your old rocker switch with a new one. Safety first, so ensure the power is turned off at the circuit breaker.

Removing the Old Switch

Start by removing the switch plate cover. Then, unscrew the switch from the electrical box. Before completely removing the switch, take a picture of the wiring configuration. This will help you wire the new switch correctly.

AD

Once the switch is removed, you'll see three or four wires. Carefully untwist the wire nut(s) and remove the old wires from the switch. Be gentle, as the wires can be brittle.

Wiring the New Switch

Now it's time to wire the new switch. The process is the same for all types of rocker switches:

  1. Strip about 3/4 inch of insulation from the ends of the wires.
  2. Wrap the bare end of each wire around the appropriate screw terminal on the new switch. Ensure the wires are tight against the terminal.
  3. Tighten the screw to secure the wire. Be careful not to over-tighten, as this can damage the wire and the switch'sTerminal.
  4. For SPDT and three-way switches, ensure the common wire (usually white or gray) is connected to the common terminal. The other wires go to the 'Traveler' or 'Line' terminals.

Secure the switch to the electrical box. If the new switch is a different size or type than the old one, you may need to use a splice box or fill the gap with a faceplate extender.

AD

Testing Your New Rocker Light Switch

With the new switch securely in place, it's time to test your work:

Turn On the Power

Slowly turn the power back on at the circuit breaker. Then, flip the switch on and off a few times to see if it works properly.

Inspect Your Work

Safety first! Check for any signs of overheating, scorching, or sparking. If everything looks and smells good, pat yourself on the back. You've successfully replaced your old rocker light switch.

Regular maintenance and replacement of worn-out parts are key to keeping your home's electrical system safe and functional. If you're ever unsure about any aspect of electrical work, don't hesitate to call a professional electrician. Stay safe and enjoy your newly functioning exterior lights!

AD