how to replace a recliner spring

Easy Recliner Spring Replacement: Step-by-Step Guide

By Ashley Davis
AD

Has your once-comfy recliner started to feel more like a torture device than a cozy reading chair? The issue might be a worn-out spring. Replacing a recliner spring isn't as daunting as it sounds; with the right tools and a bit of patience, you can restore your chair's comfort in no time. Let's dive into the step-by-step process of how to replace a recliner spring.

Before you begin, make sure you have all the necessary tools and materials. You'll need a replacement spring, a Phillips or flathead screwdriver, an adjustable wrench, pliers, and sometimes, a hammer. Always prioritize safety first, so put on safety glasses and gloves. Now, let's get started.

Identifying and Removing the Old Spring

The first step is to identify the type of spring in your recliner. There are two types: S-shaped and Continuous Loop. Once you've identified it, it's time to remove the old one.

AD
How To Replace A Recliner Spring - Hunker
How To Replace A Recliner Spring - Hunker
Fixing a Broken Recliner Spring
Fixing a Broken Recliner Spring
How to Replace a Recliner Spring
How to Replace a Recliner Spring

Start by removing the chair's seat cushion and backrest. Use a screwdriver to detach any fabric or padding attached to the frame. Then, carefully disconnect the spring from the frame using pliers and an adjustable wrench. If the spring is rusted in place, you might need to use a hammer to gently tap it loose.

Removing the Old S-Spring

For S-shaped springs, you'll need to unhook each end of the spring from its corresponding bracket. Do this carefully, as these springs can be quite stiff. Once unhooked, you can remove the spring from the chair.

How to replace a recliner footrest 7\
How to replace a recliner footrest 7\
Recliner Footrest Too Hard to Close? Try These Easy Fixes 🔧
Recliner Footrest Too Hard to Close? Try These Easy Fixes 🔧

Tip: To make this process easier, you can use a pair of needle-nose pliers to gently bend the ends of the spring away from the bracket.

Removing the Old Continuous Loop Spring

For Continuous Loop springs, you'll need to disconnect the spring from the swivel and the side frames. To do this, you might need to unscrew the side frames from the chair's base. The spring should then unhook and slide right out.

AD

Remember, the goal here is to remove the old spring without damaging the chair's frame. Take your time, and don't force anything if it doesn't come loose easily.

Installing the New Spring

Now that you've successfully removed the old spring, it's time to install the new one. Before you start, make sure your new spring is the correct type and size for your chair.

Start by positioning the new spring in the same location as the old one. Ensure it's tensióned properly for the type of chair you have. For S-shaped springs, hook one end into its bracket, then pull the other end towards the opposite bracket. Use pliers to secure it in place. Repeat this process for the other end. For Continuous Loop springs, follow the same process, ensuring the spring is properly tensioned and hooked into the swivel and side frames.

AD

Securing the New S-Spring

For S-shaped springs, use a pair of pliers to gently bend the ends of the spring back into the brackets. Make sure the spring is securely fastened and the tension is even on both sides.

Securing the New Continuous Loop Spring

For Continuous Loop springs, use an adjustable wrench to tighten the spring back onto the swivel and side frames. Ensure the tension is even and the spring is securely fastened.

Tip: If your new spring is too tight or too loose, you might need to adjust the tension by bending the spring slightly. Always ensure the spring is evenly tensioned to prevent uneven wear and tear.

AD

Reassembling the Recliner

With the new spring securely in place, it's time to reassemble your recliner. Start by reattaching the seat cushion and backrest. Use a screwdriver to secure the fabric or padding you removed earlier.

Then, test the chair to ensure the reclining mechanism works as it should. If everything is functioning properly, congratulate yourself! You've just mastered how to replace a recliner spring.

Regular maintenance is key to keeping your recliner in tip-top shape. Make sure to inspect your chair's springs regularly to catch any wear and tear early. By doing so, you'll extend the life of your chair and ensure it remains your cozy haven for years to come.

So, go ahead, take a seat, and enjoy the comfort of your newly spruced-up recliner. Happy lounging!

AD