how to replace a outside faucet handle

How to Replace an Outdoor Faucet Handle

By Joseph Young
AD

Are you dealing with a stubborn outside faucet handle that's become more of a challenge to turn? Or perhaps it's leaking, causing you distress? Replacing an outside faucet handle is a manageable DIY task that can save you the cost of hiring a plumber. Let's guide you through the process, step by step.

Before we proceed, it's essential to have the right tools. You'll need a screwdriver, adjustable wrench, pliers, tubing cutter, Teflon tape, and your replacement faucet handle. Safety first: ensure the water supply is turned off at the main valve and open the faucet to relieve any residual pressure.

Preparation: Removing the Old Handle

The first step is to remove the old handle. For zscrew-type handles, use a screwdriver to remove the screws. For older models, you might need to use a wrench or pliers to unscrew the handle's base.

AD
How to Fix a Leaky Outdoor Faucet
How to Fix a Leaky Outdoor Faucet
How to Fix a Leaking Outdoor Faucet
How to Fix a Leaking Outdoor Faucet
Fixing an Outdoor Faucet
Fixing an Outdoor Faucet

Once the handle is loose, unscrew the setscrew located at the base of the handle using an Allen wrench. This screw secures the handle to the faucet stem. After removing it, pull the handle off to expose the stem.

Disassemble the Stem

Use an adjustable wrench to unscrew the packing nut. This nut sits directly beneath the handle and secures the stem in place. It might be tight, so you may need to use some force. Protect the faucet body with a cloth to prevent scratches.

How To Replace An Outdoor Water Faucet - Hunker
How To Replace An Outdoor Water Faucet - Hunker
How to Fix a Leaky Outdoor Faucet Handle
How to Fix a Leaky Outdoor Faucet Handle

Once the packing nut is loose, remove it, and the stem should lift out easily. If the stem is stiff, rock it gently side to side while pulling up. If it's still stuck, you may need to carefully use a hacksaw to cut the stem.

Remove the Old Seat Washer

The seat washer sits at the bottom of the stem and helps create a seal between the faucet and the valve body. Use needle-nose pliers to pull it out. If it's broken or worn, replace it with a new one.

AD

Clean the valve body with a steel wool pad dipped in CLR (Calcium, Limescale, Rust) remover or a similar product. This will help remove any corrosion and rust, ensuring a tight seal with the new washer.

Installing the New Handle

The process of installing the new handle is largely the reverse of removing the old one. Start by applying a thin layer of plumber's grease to the threads of the new stem. This helps prevent rust and makes it easier to adjust the handle in the future.

Thread the new stem into the valve body, ensuring it's facing the correct way. The handle should be on top. Hand-tighten the stem as far as you can, then use an adjustable wrench to tighten it an additional 1/4 to 1/2 turn. Be careful not to overtighten and strip the threads.

AD

Install the New Seat Washer

If you replaced the old seat washer, install the new one now. One side should be smooth, and the other has a pathways for water. Ensure the smooth side faces down.

Carefully guide the stem back into place, using the same motions as when you removed it. Hand-tighten the packing nut, then use an adjustable wrench to tighten it another 1/4 to 1/2 turn.

Attach the New Handle

Wrap the threads of the stem with Teflon tape to create a watertight seal. Screw on the new handle, using the setscrew to secure it in place. Tighten it with an Allen wrench.

AD

Before turning the water back on, double-check all connections to ensure nothing has come loose. Turn the main valve back on, then open the faucet to check for leaks. If everything is sealed properly, you're all set!

Congratulations, you've successfully replaced your outside faucet handle! Regular maintenance will keep your faucet in good working order. Now, it's time to turn your attention to your next DIY task, or perhaps reward yourself with a well-earned break.

AD