how to change outside faucet handle

How to Replace an Outside Faucet Handle

By Andrew Davis
AD

Has your outside faucet handle been acting up lately? Don't let a leaky or damaged handle spoil your day. Replacing it is a straightforward DIY task that can save you the cost of a plumber. With the right tools and steps, you'll be enjoying problem-free water access in no time. Let's dive into a comprehensive guide on how to change that outside faucet handle.

Before we start, ensure that you have everything you need. Grab your toolbox, and make sure it includes adjustable pliers, channel locks, a screwdriver, and a hacksaw. You'll also need a new faucet handle, which you can find at any local hardware store. We'll be focusing on outdoor faucets with handles, not the faucets with knobs. Now, let's get started.

Preparation and Materials

To begin, you'll need to prepare your workspace and gather the necessary components. Turn off the water supply to the faucet. If you're unsure, you can do this at the main water shutoff valve. Also, open the faucet to release any remaining water pressure and prevent any leaks during the replacement process.

AD
How to Fix a Leaky Outdoor Faucet
How to Fix a Leaky Outdoor Faucet
Fixing an Outdoor Faucet
Fixing an Outdoor Faucet
How to Fix a Leaking Outdoor Faucet
How to Fix a Leaking Outdoor Faucet

Once the water is safely turned off, ensure you have the correct faucet handle for your type of faucet. The two most common types are washer-style and ball-style. Washer-style faucets use a rubber washer to create a tight seal, while ball-style faucets feature a brass ball assembly. Confirm your faucet type before purchasing the new handle.

Tools Needed

As mentioned earlier, you'll need a basic set of tools for this DIY project. Here's a quick reminder of the essentials:

a green hose connected to the side of a house with a red arrow pointing towards it
a green hose connected to the side of a house with a red arrow pointing towards it
How to Fix an Outdoor Faucet in Minutes: Quick DIY Repair Guide
How to Fix an Outdoor Faucet in Minutes: Quick DIY Repair Guide
  • Adjustable pliers or channel locks
  • Screwdriver (phillips or flathead, depending on your faucet's screws)
  • Hacksaw
  • New faucet handle (ensure it matches your faucet type)

Safety First

Before starting any work on your outdoor faucet, make sure you're wearing appropriate safety gear, including gloves and safety glasses. Be cautious when handling sharp objects and cutting tools. Keep children and pets away from the work area during the process.

Now that you're properly prepared and have all the necessary tools and materials, it's time to dive into the step-by-step process of changing that outside faucet handle.

AD

Removing the Old Faucet Handle

To remove the old faucet handle, you'll first need to access the mechanisms behind the handle. Some handles may have decorative covers that you can remove by unscrewing them with a screwdriver. On others, you might need to carefully pry off the handle using channel locks.

Once you've exposed the interior, you'll see two screws holding the handle in place. Unscrew and remove these screws using your screwdriver. With the screws out, you can now pull off the old handle and set it aside. If there's any stubborn residue or mineral buildup, you can use a wire brush to clean it off.

Unscrewing the Packing Nut

Behind the old faucet handle, you'll find a packing nut. This nut helps control water flow by compressing the washer or ball joint. To remove the packing nut, use your adjustable pliers or channel locks to gently loosen and unscrew it. Turn it counterclockwise slowly to avoid damaging the faucet's stem.

AD

As you're unscrewing, you might encounter some resistance. If the packing nut is too difficult to turn by hand, you can use a wrench or pliers for extra leverage. Be careful not to apply too much force, as this could strip the threads or damage the faucet.

Removing the Faucet Stem

With the packing nut removed, you should now be able to see the faucet stem. The stem is connected to the handle and controls the water flow. Gently pull the stem out of the faucet body. If it's stuck, try using a pair of channel locks to grasp and turn the stem counterclockwise while pulling.

If the stem is still not coming out, you might need to use a hacksaw to cut the stem flush with the faucet's body. Be careful when cutting, and ensure the blade is fully submerged in water to prevent overheating and possible damage to the metal. After cutting, use your pliers to gently remove the stem piece.

AD

Installing the New Faucet Handle

Now that the old faucet handle and stem have been removed, it's time to install the new faucet handle. Begin by fitting the new handle onto the faucet stem. Ensure that the handle is connected correctly, which should be the same way it was attached to the old stem.

Slide the handle and stem back into the faucet body. The new handle should fit snugly and line up with the faucet body. If it's too loose or wobbly, you might need to tighten the packing nut or adjust the handle.

Securing the New Handle

With the new handle and stem securely in place, replace the packing nut and tighten it clockwise using your adjustable pliers or channel locks. Ensure the nut is firmly secured but not overtightened, as this could damage the faucet's internal components.

Once the packing nut is secure, replace the decorative cover or screw on the handle to hide the faucet's mechanics. Test the new handle by turning it on and off, ensuring proper water flow and no leaks.

Reassembling the Faucet

Before you call it a day, double-check that all components are securely fastened and tightened. Replace any decorative covers or escutcheons that were removed during the process. Wipe down the faucet body to remove any remaining debris or dust.

Now that the new faucet handle is installed and tested, reopen the water supply valve and turn on the faucet to check for any leaks or water flow issues. If everything is working properly, you're all set! Enjoy your newly installed faucet handle and have peace of mind knowing that you tackled this DIY task like a pro.

Congratulations on successfully changing that outside faucet handle! You've not only saved money by tackling this project yourself but also gained valuable experience in DIY home maintenance. As you continue to tackle other projects around your home, remember that preparation, the right tools, and a step-by-step approach are key to success. Happy repairing!

AD