how to replace a moen faucet cartridge

Step-by-Step Guide: Replacing Your Moen Faucet Cartridge

By Robert Allen
AD

Do you have a Moen faucet that's not functioning as it should? The issue might be a faulty cartridge. Replacing it can restore your faucet's performance. Here's a step-by-step guide on how to replace a Moen faucet cartridge.

Before you start, gather your tools. You'll need a flathead screwdriver, adjustable pliers, a towel, and, of course, the new Moen faucet cartridge. Make sure to turn off the water supply before you start.

Preparation

Begin by turning off the water supply to your faucet. Usually, the supply valves are located underneath the sink.

AD
How to repair a leaky single lever moen bath or shower faucet..Older style
How to repair a leaky single lever moen bath or shower faucet..Older style
How to repair/replace a leaky moen cartridge on a single lever tub/shower faucet and adjust temp.
How to repair/replace a leaky moen cartridge on a single lever tub/shower faucet and adjust temp.
a person is holding a toothbrush over a sink faucet in a bathroom
a person is holding a toothbrush over a sink faucet in a bathroom

Next, turn on the faucet to relieve any remaining pressure in the lines. This step is crucial to avoid any water shooting out unexpectedly when you remove the faucet's handle.

Removing the Faucet Handle

First, use a Phillips or flathead screwdriver to remove the cap or screw on the faucet handle. The location of the cap or screw depends on your Moen faucet model.

How to Remove and Install a Kitchen Moen Faucet - Keeping it Simple
How to Remove and Install a Kitchen Moen Faucet - Keeping it Simple
How To Replace A Single-Handle Shower Cartridge | 1-Tom-Plumber
How To Replace A Single-Handle Shower Cartridge | 1-Tom-Plumber

Once the cap or screw is removed, you should be able to pull off the faucet handle. Some handles might be secured by a set screw, which you'll need to remove with an Allen wrench.

Accessing the Cartridge

With the handle off, you'll see a Cam (if you have a Moen two-handle faucet) or an escutcheon (if you have a Moen single-handle faucet) covering the cartridge. Remove the Cam or escutcheon using adjustable pliers.

AD

The cartridge is now exposed. You'll need to remove the retaining clip that holds the cartridge in place. Carefully use your pliers to pry the clip off. Be careful not to lose the clip, as it's essential for reinstalling the new cartridge.

Removing the Old Cartridge

Once the clip is removed, you should be able to pull out the old cartridge. If it's stuck, you might need to use pliers to gently wiggle it loose.

Before you remove the cartridge completely, take a towel and wipe the faucet's interior to remove any debris that might have collected there.

AD

Installing the New Cartridge

Now that the old cartridge is out, you can install the new one. Make sure your new cartridge matches the old one in terms of size and model number. Moen's cartridges are interchangeable, but it's always a good idea to double-check.

Simply push the new cartridge into the faucet's valve body. If it's not going in easily, make sure you're orienting it correctly. The inlet holes should line up with the water supply lines.

Reassembling the Faucet

With the new cartridge in place, you can start reassembling the faucet. First, replace the retaining clip to keep the cartridge in place. Then, put back the Cam or escutcheon, followed by the faucet handle.

AD

If your faucet came with a decorative cap or screw, put that back on now. Make sure everything is assembled correctly, and the handle is operating smoothly.

Testing the New Cartridge

Finally, it's time to turn the water supply back on. Slowly turn the handle to test the water flow.

If water is flowing correctly, congratulations! You've successfully replaced your Moen faucet cartridge. If there are any issues, double-check your work to ensure everything is installed correctly.

Regular maintenance is key to keeping your Moen faucet in top condition. Don't forget to inspect your faucet's cartridge every six months to a year to prevent any leaks or malfunctions. Happy DIYing!

AD