how to replace a frost free spigot

Step-by-Step Guide: Replace Frost-Free Spigot Like a Pro

By Sarah Smith
AD

Has your frost-free spigot given up the ghost? Don't be left high and dry—a DIY replacement is not only feasible but also wallet-friendly. In this comprehensive guide, we'll walk you through the process step-by-step, ensuring you a successful, leak-free outcome. Let's dive right in!

Before we embark on this journey, let's clarify what we mean by 'frost-free.' These spigots, also known as ‘insulated’ or 'anti-siphon,' are designed to prevent water from freezing in the pipe, thereby protecting your plumbing from potential damage. By the end of this article, you'll possess the know-how to replace a frost-free spigot and safeguard your home against plumbing mishaps.

Gathering Your Tools and Materials

First things first—you need to ensure you have the right tools and materials for the job. Having the correct tools at hand will not only make your life easier but also prevent potential accidents.

AD
an old spigot with the words how to replace spigot on it
an old spigot with the words how to replace spigot on it
How to Remove Frost Free Spigot
How to Remove Frost Free Spigot
💧Fix Your Leaky Spigot with Our DIY Guide!
💧Fix Your Leaky Spigot with Our DIY Guide!

Here's a list of tools and materials you'll need:

  • New frost-free faucet
  • Adjustable wrench
  • Teflon tape
  • Channel-type pliers
  • Hacksaw (if removing an old plastic spigot)
  • Insulation tape or pipe sleeve (optional, for added protection)

Turning Off the Water Supply

Before you start, you must turn off the water supply to the spigot. This precautionary measure will prevent water from spilling out, creating a mess and potentially causing damage to your property.

Outdoor Spigot Replacement | Sharkbite Frost Free
Outdoor Spigot Replacement | Sharkbite Frost Free
How to Replace an Outdoor Water Spigot
How to Replace an Outdoor Water Spigot

Most outdoor spigots have a shut-off valve that you can turn clockwise to stop the water flow. If your spigot doesn't have one, you'll have to turn off the main water supply for your home.

Draining the Faucet

After turning off the water supply, you'll need to drain any remaining water from the faucet. This step is crucial, as any trapped water could freeze and cause damage to the new spigot.

AD

To drain the faucet, open it and leave it open until no more water dries. This process may take a while, so be patient. Once done, you can move on to the next stage.

Removing the Old Spigot

With the water turned off and drained, you can now safely proceed to remove the old spigot. The process might vary slightly depending on the material of the old spigot, but we'll walk you through both scenarios.

Removing a Metal Spigot

To remove a metal spigot, use an adjustable wrench to loosen and remove the packing nut. Then, unscrew the spigot from the supply pipe using a wrench. You might need to use some force, as metal spigots can be quite stubborn. If the spigot is stuck, wrap it with some duct tape to provide better grip.

AD

Removing a Plastic Spigot

Removing a plastic spigot can be more challenging, as it's fixed in place by the frost-proof design. To remove it, you'll need to cut the spigot using a hacksaw. Make sure to cut the spigot as close to the wall as possible to minimize waste and make way for the new spigot.

After cutting, use channel-type pliers to unscrew the spigot from the supply pipe. Be careful not to damage the supply pipe in the process. If the spigot is still stuck, you might need to use a vice grip.

Preparing the New Spigot and Supply Pipe

With the old spigot removed, it's time to prepare the new one and the supply pipe for installation. This step is crucial for ensuring a leak-free installation.

AD

Preparing the New Spigot

Before installing the new frost-free spigot, ensure it's suitable for the location and purpose. For instance, if the spigot is for a sprinkler system, make sure the new one is compatible with your sprinkler system.

Also, check that the new spigot matches the existing threads. If the threads differ, you might need an adapter to connect the new spigot to the supply pipe.

Preparing the Supply Pipe

Before installing the new spigot, clean the supply pipe to remove any debris or old Teflon tape. Use a wire brush or a piece of wire to clean the pipe's threads.

Next, wrap the supply pipe's threads with Teflon tape. Wrap the tape clockwise, wrapping it tightly around the threads. Use about three or four layers of tape to ensure a Seal.

Installing the New Spigot

Now that your new frost-free spigot and supply pipe are prepared, it's time to install the new spigot. This process is quite similar to installing a new faucet in your kitchen or bathroom.

Installing the Spigot

Starting with the spigot's sleeve, screw it onto the supply pipe by hand. Once it's hand-tight, use a wrench to tighten it slightly. Be careful not to overtighten, as this could damage the sleeve and cause leaks.

Next, apply some Teflon tape to the spigot's packing nut and body. Then, hand-screw the spigot onto the sleeve. Again, use a wrench to tighten it slightly. Remember, you don't want to overtighten and risk causing leaks.

Insulating the Spigot

Frost-free spigots come with an anti-siphon device to prevent water from freezing in the pipe. However, for added protection, you can insulate the spigot and the supply pipe.

To insulate, wrap the spigot and the supply pipe with insulation tape or a pipe sleeve. Ensure the insulation covers the spigot and extends at least 6 inches along the supply pipe. This insulation will provide additional protection against freezing temperatures.

Testing the New Spigot

With your new frost-free spigot installed, it's time to test it to ensure it's working correctly.

Turning On the Water Supply

Slowly turn the water supply back on. If you turned off the main water supply, open the main valve first. Then, open the shut-off valve to the spigot.

Checking for Leaks

After turning on the water, check for any leaks around the spigot. If there are no leaks, congratulations—you've successfully replaced your frost-free spigot!

However, if there are leaks, it's possible that you didn't tighten the spigot or the sleeve enough. In this case, tighten them slightly using a wrench. Be careful not to overtighten, as this could cause the sleeve or spigot to crack.

And there you have it! You've successfully replaced your frost-free spigot and ensured your plumbing is protected against potential freezing damage. Regular maintenance checks on your spigot will help prolong its lifespan and prevent any potential issues in the future. Happy DIYing!

AD