how to install a frost free hydrant

How to Install a Frost-Free Hydrant: Step-by-Step Guide

By Rachel Miller
AD

Installing a frost-free hydrant is a crucial task for homeowners, especially in colder regions, to prevent water pipe damage during winter. A frost-free hydrant is designed to protect the water supply lines from freezing by drawing water back into the house when not in use. This article will guide you through the process, ensuring your hydrant is installed correctly and efficiently.

Before starting, gather all necessary tools and materials. You will need a frost-free hydrant, a tape measure, a shovel, a socket wrench, Teflon tape, a hacksaw, a Silicone sealer, and safety gloves. Additionally, you'll need to know where the main water supply and the area for the hydrant are located.

Preparation

Before starting, ensure all water to the hydrant site is turned off. Locate and mark the spot where the hydrant will be installed. The height of the hydrant should be at least 18" above the ground and not closer than 5 feet from the house or other obstructions.

AD
How to Install a Frost Free Hydrant
How to Install a Frost Free Hydrant
Yard Hydrant Install Complete Guide – Read This First!
Yard Hydrant Install Complete Guide – Read This First!
How to Install a Frost Free Yard Hydrant
How to Install a Frost Free Yard Hydrant

Dig a hole that's at least 30" deep and wide enough to accommodate the hydrant's base. Ensure the bottom of the hole is flat and stable for the hydrant to sit on.

Preparing the hydrant base

The base of the frost-free hydrant must be installed right. The base should be level and plumbed, with the outlet on top and the drain plug at the bottom.

Frost-free hydrants
Frost-free hydrants
EASY! How to Install a Frost Free Yard Hydrant & Planting Potatoes in BAGS?
EASY! How to Install a Frost Free Yard Hydrant & Planting Potatoes in BAGS?

Prior to installation, apply a bead of silicone sealer around the base of the hydrant. This will provide an additional layer of protection against freezing temperatures. Once the sealer is applied, position the hydrant in the hole, ensuring it's level and plumb.

Connecting the hydrant to the water supply

With the hydrant base installed, it's time to connect it to the main water supply. Ensure the water is still turned off before connecting any pipes.

AD

Use a hacksaw to cut the copper pipe to the correct length, then use Teflon tape around the threads of the hydrant and the pipe to create a watertight seal. Screw the pipe into the hydrant, turning by hand until it's snug, then use a socket wrench to tighten it another 1/4 to 1/2 turn.

Installing and Securing the Hydrant

Once the hydrant is connected to the water supply, it's time to secure it in place and make sure it's ready for winter.

Begin by filling the area around the hydrant with wash gravel. This helps to promote drainage and protect the hydrant from frost heave. Then, fill the rest of the hole with soil, ensuring the hydrant is set at the correct height.

AD

Freezing protection

A frost-free hydrant is designed to drain excess water back into the house when not in use, protecting against freezing. However, during the winter season, it's essential to ensure the hydrant remains dry.

To do this, open the hydrant several times throughout the winter to drain any water that may have accumulated. Additionally, ensure the drain plug is closed when not in use to prevent backflow and contamination. Applying a small amount of penetrating oil on the hydrant spigot and plug can also help prevent freezing.

Post-Installation Check

After installation, turn on the water supply slowly and check for any leaks. If there are no leaks, the frost-free hydrant is now ready for use throughout the year.

AD

Regular maintenance is key to ensuring your frost-free hydrant continues to work efficiently. Before winter, always remember to drain the hydrant and close the drain plug. During winter, regularly open the hydrant to allow for proper drainage.

By following these steps, you can ensure a successful frost-free hydrant installation. Regular maintenance will help extend the lifespan of your hydrant and protect your home's water supply from freeze damage.

AD