How to Remove Water Filter on Frigidaire
There may come a time when you need to remove and replace the water filter in your Frigidaire refrigerator. Whether it's due to a change in water quality, or simply because it's been a while since the last replacement, knowing how to remove the filter is a useful skill to have. Let's dive into a step-by-step guide on how to do just that.
Before we start, it's important to note that the process may vary slightly depending on the model of your Frigidaire refrigerator. This guide will be based on the most common models, but if you have any concerns, it's always a good idea to consult your user manual or contact Frigidaire customer service.
Preparation and Gathering Tools
Before you begin, you'll need to gather a few tools to make the process as smooth as possible. These include a screwdriver (usually the one that comes with your refrigerator), a new water filter, and a downstream connections hexagonal wrench.
It's also a good idea to have a towel or a large bowl nearby to catch any water that may spill out when you remove the old filter.
Locating the Filter
The water filter on your Frigidaire refrigerator is usually located behind the bottom front grille. To access it, you'll need to remove the bottom drawer completely, taking care not to spill any ice or food.
Once the drawer is out, you should see the grille. Remove it using the screwdriver, and you'll find the water filter housing. Your filter is inside this housing.
Removing the Old Filter
Before you start removing the old filter, make sure you have a bowl or towel ready to catch any water that spills out. The filter may be wet, and you don't want water all over your floor.
First, turn the filter clockwise to the left. You should feel it release with a click. Then, pull it out straight up towards you. If it's stuck, try jiggling it a bit. If it's still not coming out, you may need to use the hexagonal wrench to turn it counterclockwise.
Installing the New Filter
Now that you've removed the old filter, it's time to install the new one. First, make sure your new filter is compatible with your refrigerator model. You can usually find this information in your user manual or on the filter packaging.
Next, wet the new filter slightly. This helps to remove any air that may be trapped inside and ensures that it works properly from the start.
Aligning the Filter
Before you insert the new filter, make sure the arrow on the filter housing points upwards. This indicates which way the filter should go in.
_align the filters tabs with the slots in the filter housing, then turn the filter clockwise to the right. You should feel it snap into place. Push it gently upwards to ensure it's fully seated.
Priming the Filter
Once the new filter is in place, you'll need to prime it before you can use it. This involves running water through the filter to purge any trapped air.
First, turn the water dispenser on and let it run until the pressure sensor light turns off. This indicates that the water is flowing freely through the new filter. Then, turn the dispenser off and open the freezer door to release any pressure in the system.
Your new water filter is now ready to use!
Regularly replacing your water filter is key to ensuring that your Frigidaire refrigerator continues to deliver clean, fresh water. It's recommended that you replace your filter every six months, or when the indicator light on your refrigerator tells you it's time.
With a little bit of know-how and the right tools, removing and replacing your water filter can be a breeze. So the next time you need to do it, you'll know exactly what to do. Happy filtering!