how to remove toilet flange glued to outside of pipe

How to Remove Glued Toilet Flange from Pipe: Step-by-Step Guide

By Anthony Rodriguez
AD

Dealing with a toilet flange that's glued to the outside of your pipe can be a daunting task, but it's not impossible. With the right tools and techniques, you can remove the toilet and access the area safely. In this guide, we'll walk you through the process step-by-step, from preparation to completion.

Before we begin, it's crucial to understand that this task requires careful attention to detail and patience. It's also important to note that if the toilet is glued rather than waxed, you may end up damaging the pipe during removal. In such cases, it's recommended to call a professional plumber. However, if you're confident and have the necessary tools, let's dive into the process.

Preparation: Gathering Your Tools

To ensure a smooth process, you'll need to gather the following tools:

AD
How to Remove Glued Toilet Flange
How to Remove Glued Toilet Flange
How to Replace Flange on Toilet
How to Replace Flange on Toilet
there is a hole in the floor with a spatula next to it
there is a hole in the floor with a spatula next to it
  • Adjustable wrench
  • Putty knife
  • Hacksaw or reciprocating saw with metal blade
  • Plumber's putty
  • New toilet wax ring
  • New bolts and washers
  • New toilet sealant

Safety Precautions

Safety is paramount when working with plumbing. Here are some precautions to take:

  • Wear safety glasses and gloves to protect from debris and splashing water.
  • Turn off the water supply at the shutoff valve behind the toilet.
  • Disconnect the water supply line from the toilet's base.

Removing the Toilet

With the preparation out of the way, it's time to remove the toilet. Here's how:

How to replace a flange outside the pipe | Toilet flange replacement
How to replace a flange outside the pipe | Toilet flange replacement
Toilet Repair Ring Flange: Fix Leaks, Reset Your Toilet, and Stop a Running Toilet
Toilet Repair Ring Flange: Fix Leaks, Reset Your Toilet, and Stop a Running Toilet
  • Use an adjustable wrench to loosen and remove the bolts that secure the toilet to the floor.
  • With the help of a partner, carefully lift and remove the toilet from its position.

Once the toilet is removed, you'll see the glued flange. In the next section, we'll discuss how to tackle this situation.

Removing the Glued Flange

Removing a glued toilet flange can be challenging, but not impossible. Here's a step-by-step process to follow:

AD

Cutting the Flange

The first approach is to cut the flange using a hacksaw or reciprocating saw. This method is useful when the glue is old and brittle:

  1. Use a hacksaw or reciprocating saw with a metal blade to carefully cut through the flange.
  2. Start from one side of the flange and work your way around, taking your time to avoid damaging the pipe.

Grinding the Flange

If the glue is strong and the flange is not cooperating, you may need to use a grinder:

  1. Use a grinder with a cutoff wheel to carefully cut through the flange.
  2. Again, take your time to avoid damaging the pipe. Wear safety glasses and gloves when using a grinder.

Once you've removed the flange, you'll be left with a pipe that may have some old glue or pipe sealant on it. In the following section, we'll discuss how to prepare the pipe for the new flange.

AD

Preparing the Pipe for the New Flange

Before installing the new toilet, you'll need to prepare the pipe. Here's how:

Cleaning the Pipe

Using a putty knife, carefully scrape off any remaining glue or sealant from the pipe:

  1. Scrape the pipe in a downward motion to avoid pushing debris into the pipe.
  2. Wipe away any debris with a damp cloth.

Installing the New Flange

Now that the pipe is clean, you can install the new toilet flange:

AD
  • Position the new flange over the pipe, ensuring it's level and centered.
  • Secure the flange using nuts and bolts. Tighten them enough to hold the flange in place, but not so tight that you damage the pipe.

With the new flange installed, you're ready to reinstall your toilet. In the next section, we'll discuss how to do this.

Reinstalling the Toilet

Reinstalling the toilet is a straightforward process once you've prepared the pipe and installed the new flange:

Fitting the Wax Ring

Before reinstalling the toilet, you'll need to fit a new wax ring:

  • Center the new wax ring over the flange, ensuring it's tight against the flange.

Reinstalling the Toilet

Now, you can reinstall the toilet:

  • Carefully place the toilet over the wax ring, ensuring it's centered on the bolts.
  • Screw on the new washers and nuts, using an adjustable wrench to tighten them.
  • Hand-tighten the nuts, then use the wrench to give them a quarter turn to ensure a good seal.
  • Reconnect the water supply line and turn the water supply back on.

Your toilet is now ready for use. While it's recommended to test it gently at first to ensure everything is working correctly, your toilet should now be as good as new.

Removing a toilet flange glued to the outside of a pipe can seem daunting, but with the right tools and techniques, it's a task that many homeowners can tackle themselves. Always remember to prioritize safety and take your time when working with plumbing. If at any point you feel uncertain, don't hesitate to call a professional plumber. They can provide the expert help you need to ensure your plumbing is in top shape.

AD