How to Remove Nintendo Switch Joy-Con Controllers
When it comes to game accessories, controllers are undoubtedly at the top of the list. However, there might come a time when you need to remove them - perhaps to clean them, replace worn-out parts, or simply disassemble for fun. This guide will walk you through how to remove switch controllers, step by step, ensuring a safe and successful procedure.
Before we dive into the intricacies of removing a Nintendo Switch controller, it's essential to understand the different types: the Joy-Con (L) and (R), and the Pro Controller. While the process varies slightly between them, the basics remain the same. Let's start with the Joy-Con controllers.
Removing Joy-Con Controllers
The Joy-Con controllers, attached to either side of the Switch console, are composed of two halves: the actual controller and the grip. To remove them, you'll need to disconnect the grips first.
Unlocking the Joy-Con Grip
On the rear of each Joy-Con, you'll find a small rectangular panel with a tiny release button. Press and hold this button while simultaneously sliding the Joy-Con outwards. You should feel a slight give, and then the grip will pop off.
Repeat this process until both Joy-Con controllers are free from their grips. Now that you have the individual controllers, let's move on to removing the Joy-Con caps, covering the USB-C ports and MicroSD card slots.
Removing the Joy-Con Caps
At the base of each controller, you'll notice a small tab on the bottom-left corner. Gently pull this tab upwards to release the cap. Once detached, the cap should simply snap off. Be careful not to pry、lest you break it.
With the caps removed, you can now access the USB-C port and MicroSD card slot. Remember the location of the caps, as you'll need to reattach them later.
Removing the Pro Controller
The Pro Controller is a single-piece design, making the process of removing it slightly different from the Joy-Cons. However, it's no less straightforward.
Detaching the Accessory Ridges
The Pro Controller has small plastic ridges on either side of the controller, which are meant to slip into the Switch console's accessory rail. To detach these ridges, simply lift them upwards using your fingernails or a small, flathead screwdriver.
With the ridges removed, you can now pull the Pro Controller off the Switch console. As with the Joy-Cons, ensure you know where the ridges go, as you'll need to reattach them later.
Removing the Back Panel
Like the Joy-Cons, the Pro Controller also has a back panel that you can remove to access its internals. On either side of the controller, you'll find small holes designed for a SIM card-eject pin or a small flathead screwdriver.
Insert your tool into one of these holes and push firmly. You should feel the back panel pop off. Once detached, slide the panel outwards to completely remove it. Be cautious not to lose the small rubber feet underneath that provide grip.
And there you have it - you've successfully removed your Switch controller(s). Remember to keep all screws, caps, and other components safe, and always double-check that you've reattached everything correctly before gaming again. Safe removal practices ensure your Switch controller remains in excellent condition for many gaming sessions to come.