how to remove rv toilet flange

Remove RV Toilet Flange: Step-by-Step Guide

By Michael Brown
AD

Have you found that the seams around your RV toilet are leaking, or perhaps there's a foul odor emanating from the floor? It might be time to address the issue by replacing the RV toilet flange. This part connects your RV toilet to the sewer drain and plays a crucial role in preventing leaks and bad smells. Here's a step-by-step guide on how to remove an RV toilet flange, ensuring you don't damage your RV's plumbing in the process.

Before you start, gather the necessary tools and materials. You'll need a putty knife, screwdriver, utility knife, chisel, heavy-duty trash bag, rubber gloves, and, of course, a new RV toilet flange. Having a follower installed behind the old flange can also simplify the removal process. If you're unsure about any of these tools or materials, consult your RV's owner's manual or an experienced RV technician.

Preparation and Safe Removal of the Old Flange

The first step is to prepare your working area and ensure safe removal of the old flange. This process involves disconnecting the water supply and draining the P-trap. Don't forget to put on those rubber gloves to keep your hands clean throughout the process.

AD
How to Remove RV Toilet Flange
How to Remove RV Toilet Flange
How to Remove Glued Toilet Flange
How to Remove Glued Toilet Flange
Toilet Repair Ring Flange: Fix Leaks, Reset Your Toilet, and Stop a Running Toilet
Toilet Repair Ring Flange: Fix Leaks, Reset Your Toilet, and Stop a Running Toilet

Using a wrench, turn off the water supply valve at the toilet's base. If the valve is seized or difficult to turn, you can use a channel lock pliers for additional grip. Next, flush the toilet to empty any water in the tank. Use a towel in the toilet bowl to soak up any remaining water.

Disconnecting the Water Supply Line

Disconnect the water supply line by unscrewing the coupling nut that connects the supply line to the toilet's shut-off valve. If the nut is rusted or difficult to turn, apply a penetrating lubricant like WD-40 and allow it to soak in before trying again. Place a bucket underneath the connection to catch any remaining water.

how to replace your toilet in the rv or truck with pictures on it and text overlay that reads, how to replace your toilet in your rv
how to replace your toilet in the rv or truck with pictures on it and text overlay that reads, how to replace your toilet in your rv
Fix a Leaking RV Toilet
Fix a Leaking RV Toilet

Once the supply line is disconnected, remove the coupling nut and pull the supply line away from the toilet. If necessary, use a pair of pliers to gently straighten any bent sections of the supply line to prevent future kinks. Set the supply line aside for now, but don't discard it as you'll need it to reinstall the new toilet.

Draining the P-Trap

Now that the water supply is disconnected, it's time to drain the P-trap – the curved section of pipe beneath the toilet. Place a large, heavy-duty trash bag underneath the P-trap to catch any water or sewage that escapes during the process.

AD

Using a screwdriver, loosen and remove the J-bolt hex nuts that secure the P-trap to the RV's plumbing. You may need to use a wrench or pliers to provide extra grip if the nuts are rusted or tight. Once the nuts are removed, the P-trap should be free, and you can carefully pull it out of the way. Allow any remaining water or sewage to drain into the trash bag before continuing.

Removing the Old Toilet Flange

With the P-trap drained and the water supply disconnected, you're ready to remove the old toilet flange. The process may differ depending on whether you have a follower installed behind the old flange. Follow the appropriate steps below for your situation.

If you do not have a follower installed, the process will require careful prying and chiseling to break the old seal and remove the flange in one piece. If a follower is present, the process is more straightforward, and the old flange can be pushed out from behind.

AD

Removing the Flange Without a Follower

Carefully insert the tip of a putty knife or utility knife between the old flange and the RV's floor. Gently tap the handle of the knife with a hammer to slowly widen the gap and break the old seal. Be patient and cautious to avoid damaging the surrounding structure.

Once the seal is broken, use the putty knife or a flathead screwdriver to pry the old flange away from the floor. Work your way around the entire flange, gradually prying it up. If the old seal is stubborn or the flange is warped, you may need to use a chisel to carefully chip away at the seal or flatten the warped section. If at any point you feel unsure or fear damaging the RV's structure, consult a professional RV technician.

Removing the Flange with a Follower

Using the putty knife or utility knife, carefully cut around the edge of the old flange to release any remaining adhesive. Then, insert the tip of the putty knife or a flathead screwdriver behind the old flange and gently pry it away from the follower.

AD

With the old flange dislodged, carefully push the follower towards the old flange until the two pieces are coupled together. Now, use the putty knife or a flathead screwdriver to pry the coupled pieces away from the RV's floor. Remove both the old flange and follower as a single unit.

Preparing the Area for the New Toilet Flange

With the old toilet flange removed, clean the area thoroughly to prepare for the new flange. Use a mixture of mild soap and warm water to scrub the surrounding surface, ensuring all traces of old sealant are removed. Allow the area to dry completely before proceeding.

Inspect the underside of the new toilet flange and the surrounding area for any damage or irregularities. If necessary, shim or repair the area to ensure a proper fit for the new flange. This step is crucial to prevent leaks and ensure a secure installation.

Installing the New Toilet Flange

Determine the correct orientation for the new toilet flange based on the design and your RV's plumbing configuration. Apply a bead of plumber's putty or silicone sealant around the edge of the new flange. Be sure to follow the manufacturer's instructions for the selected sealant.

Center the new flange over the previously removed area, and gently press it into place. Ensure the new flange is properly seated, with the sealant making contact with the RV's floor. Allow the sealant to cure according to the manufacturer's instructions before connecting the water supply and reinstalling the toilet.

Reassembly and Testing

Reconnect the water supply line by threading it onto the shut-off valve and tightening the coupling nut. Be sure not to overtighten, as this could cause damage to the supply line or the toilet. Reinstall the P-trap and secure it with the J-bolt hex nuts. Make sure the P-trap is properly seated and any excess sealant is wiped away.

Perform a test flush to check for leaks and ensure the new toilet flange is properly sealed. If everything is functioning correctly, your RV's toilet should now be leak-free and ready for use. Regularly inspect the seal around the toilet flange to ensure it remains intact and provides a secure connection between your RV toilet and the sewer drain.

Proper maintenance of your RV's toilet and its components, such as the toilet flange, is essential for safe and enjoyable camping experiences. By understanding how to remove and replace an RV toilet flange, you're prepared to address any leaks or odor issues that may arise, keeping your RV's plumbing system in top condition.

AD