how to remove moen tub drain stopper

How to Remove Moen Tub Drain Stopper: Expert Guide

By Daniel Young
AD

Is your Moen tub drain stopper causing trouble, whether it's not sealing properly, stuck, or just plain unsightly? You've come to the right place. This guide will walk you through the process of removing your Moen tub drain stopper in a safe, easy-to-follow manner. Let's get started.

Before we dive into the steps, remember that safety first is the key. Wear durable gloves to prevent any nasty cuts, and keep your workplace clean and clutter-free to avoid accidents. Now, let's take a closer look at your Moen tub and its drain stopper.

Understanding Your Moen Tub Drain Stopper

Moen tub drain stoppers come in various types, but they primarily consist of a pop-up mechanism, a pivot rod, and a lift rod. The lift rod is usually the part that pops up or down to stop or allow water to flow through the drain. Understanding these components helps in figuring out why your stopper might be malfunctioning and how to fix it.

AD
two hands are holding the top of a metal object
two hands are holding the top of a metal object
Replace Your Bathtub Drain
Replace Your Bathtub Drain
a person holding a wrench in their right hand and pointing to the lever on an old overflow plate
a person holding a wrench in their right hand and pointing to the lever on an old overflow plate

To begin, turn on your tub faucet and fill the tub with a little water. This will help you understand the stopping and popping mechanism better while ensuring a smooth operation throughout the process.

Preparation and Safety Measures

Before you start, turn off the water supply to your tub. The water supply valve is usually located behind the access panel near your tub. Once water is no longer flowing, turn on the faucet briefly to relieve any residual pressure. This step ensures that no water sneaks up on you during the process.

How remove Moen Tub Stopper and unclog tub drain
How remove Moen Tub Stopper and unclog tub drain
Easily Unclog Your Bathtub Drain
Easily Unclog Your Bathtub Drain

Next, gather your tools. You'll need a screwdriver (usually a Phillips-head), an adjustable wrench, needle-nose pliers, and a flathead screwdriver. These tools will help you disassemble the drain stopper mechanism and access the pivot rod. Don't forget to wear gloves for better grip and protection.

Accessing the Pivot Rod

The pivot rod is the main component of your Moen tub drain stopper. Remove the drain plug first. Usually, it's a setscrew that secures the pivot rod to the faucet arm. Using the screwdriver, loosen and remove the plug. If it's tight, you might need to use an adjustable wrench for extra leverage.

AD

Once the plug is removed, the pivot rod should come off easily. If it doesn't, grab your needle-nose pliers to gently pull and twist it until it comes undone. With the pivot rod out, you've successfully exposed the lift rod and the tub drain stopper mechanism.

Removing the Moen Tub Drain Stopper

Now that you have access to the lift rod, you can start removing the drain stopper itself. Moen tub drain stoppers are usually secured with a setscrew at the bottom. Use your screwdriver to loosen and remove this setscrew.

Once the setscrew is out, lift the drain stopper gently. It should come right up. If it's stubborn, use your plastic-coated flathead screwdriver to carefully pry it upwards. Be patient - you don't want to damage the stopper or the tub.

AD

Inspecting and Cleaning the Lift Rod and Stopper

With the drain stopper removed, take a look at your lift rod and the mechanism it's connected to. Over time, mineral buildup, soap scum, or even hair can clog the drainage system, causing the stopper to malfunction.

Take this opportunity to clean the lift rod and the tub drain opening. Use a suitable cleaning solution and a brush to scrub away any buildup. Make sure to clean both the bottom and top parts of the tub drain. After cleaning, flush the tub with water to clear away any remaining residue.

Reinstalling the Moen Tub Drain Stopper

Now that your lift rod and tub drain mechanism are clean, it's time to reinstall the drain stopper. Carefully place the stopper back into the tub drain opening, aligning it with the hole in the lift rod.

AD

Once the stopper is in place, secure it using the setscrew you removed earlier. Use the screwdriver to tighten it snugly, but be careful not to overtighten. You're almost done!

Reassembling the Pivot Rod

Now, reinstall the pivot rod. Align it with the hole in the faucet arm, then gently push it back through the faucet arm until it locks into place.

Finally, replace the drain plug. Use your fingers at first, then tighten the plug using the screwdriver. Again, be careful not to overtighten it. With that, your Moen tub drain stopper should be working like new!

As a final step, turn the water supply back on and test your tub drain. If it's functioning properly, congratulations! You've just successfully removed and replaced your Moen tub drain stopper. Regular cleaning and maintenance will keep your tub in good working order for years to come.

AD