how to remove kohler bathtub drain stopper

Remove Kohler Bathtub Drain Stopper: Step-by-Step Guide

By Hannah Lewis
AD

At one time or another, every homeowner faces the challenge of removing a bathtub drain stopper. Whether it's to clean it, replace it, or just because it's stuck, it can be a frustrating task. Kohler bathtub drain stoppers can pose a unique challenge due to their robust construction, but with the right steps and a little patience, you can get the job done like a pro.

The first thing to understand is that there are two types of Kohler bathtub drain stoppers: trip lever and push-pull. The trip lever type is connected to the drain by a rod, while the push-pull type lifts directly from the drain. Both types can be removed using similar methods, but there are slight differences. In this guide, we'll cover both types to help you tackle any bathtub drain stopper removal task.

Safety First: Tools and Preparation

Before you start, ensure you have the right tools to avoid any damage to your bathtub and drain. You'll need a flathead screwdriver, adjustable pliers, a flathead nut driver, and a pipe wrench. You may also need a few rags to protect your bathtub from scratches.

AD
How to Remove a Bathtub Drain Stopper
How to Remove a Bathtub Drain Stopper
Replace Your Bathtub Drain
Replace Your Bathtub Drain
a person holding a wrench in their right hand and pointing to the lever on an old overflow plate
a person holding a wrench in their right hand and pointing to the lever on an old overflow plate

Next, make sure to turn off the water supply to the bathtub. Typically, these are located behind access panels near the bathtub. Once the water is off, open the faucet to relieve any water pressure in the lines.

Removing the Trip Lever Type

The trip lever type is connected to the drain by a rod. To remove it, you'll need to access the overflow plate first. This is usually a small plate near the bathtub wall with a screw in the middle. Unscrew this with your flathead screwdriver to remove the plate.

How to Remove Bathtub Drain Stopper
How to Remove Bathtub Drain Stopper
Easily Unclog Your Bathtub Drain
Easily Unclog Your Bathtub Drain

Next, use your adjustable pliers to loosen the setscrew that holds the rod in place. Once loose, use the pliers to gently pull the rod out of the drain. The lever itself should now lift off easily. If it's stuck, you can use a flathead screwdriver or a nut driver to unscrew it from the drain.

Removing the Push-Pull Type

The push-pull type is a bit simpler to remove. First, look for the setscrew on the side of the drain. Loosen this with your flathead screwdriver or nut driver. Once loose, use your flathead screwdriver to pry the stopper out of the drain. You may need to use some force, but be careful not to damage the drain.

AD

If the setscrew is on the underside of the drain, you'll need to remove the drain itself to access it. To do this, unscrew the screws around the overflow plate with your flathead screwdriver. Once the plate is removed, use your pipe wrench to carefully unscrew the drain. Be gentle to avoid damaging the threads.

Cleaning and Maintenance

Once your Kohler bathtub drain stopper is removed, take this opportunity to clean it thoroughly. Soap scum, hair, and other debris can build up over time and cause blocks. Use a mixture of hot water and vinegar to clean it, then dry it thoroughly before reinstalling.

Regular maintenance can prevent future blockages and make removal easier. For the trip lever type, regularly lubricate the rod with a dry silicone lubricant to keep it moving smoothly. For the push-pull type, make sure to regularly clean the drain to prevent hair and soap scum buildup.

AD

There you have it - a simple, step-by-step guide to removing your Kohler bathtub drain stopper. Whether you're a DIY pro or tackling your first plumbing job, these steps will help you get the job done safely and effectively. Happy repairs!

AD