how to remove moen towel bar without set screw

How to Remove Moen Towel Bar No Set Screw

By Jessica Lee
AD

If you're having trouble removing a Moen towel bar and it doesn't seem to have a set screw, don't fret. Moen offers various designs, and some may not require a set screw for installation. In this guide, we'll walk you through two common methods to remove your Moen towel bar without a set screw.

Before we start, ensure you have the right tools. You'll need a screwdriver (usually Phillips or flathead), pliers, and possibly an Allen wrench, depending on your bar's design. Always remember to work carefully to avoid damaging your towel bar and surrounding surfaces.

Method 1: Unthreading the Towel Bar

For this method, you'll be unscrewing the towel bar from the wall. It's similar to how you might remove a towel ring or other wall-mounted hardware.

AD
Decorative Grab Bars
Decorative Grab Bars
a towel rack with two towels hanging from it's sides and a towel on the other side
a towel rack with two towels hanging from it's sides and a towel on the other side
Moen MY2718BN Hilliard 18" Towel Bar - Brushed Nickel
Moen MY2718BN Hilliard 18" Towel Bar - Brushed Nickel

Start by examining the towel bar base. Moen towel bars often have small holes or notches at the base. These are designed for you to grip and turn the bar.

Using Pliers

If your towel bar has notches, you can use pliers to grip and unscrew the bar. Ensure the pliers' grip is secure and firms.

Voss Towel Ring
Voss Towel Ring
Commercial Parts & Accessories Service Kit
Commercial Parts & Accessories Service Kit

Gently turn the pliers counterclockwise. You might need to apply some force, but be careful not to strip the bar's finish or damage the pliers. If the bar starts to turn, continue unscrewing it until you can pull it off the wall.

Using an Allen Wrench (if applicable)

Some Moen towel bars might have an Allen wrench fitting instead of notches. An Allen wrench is a six-pointed star-shaped tool designed to fit into similar-shaped recesses.

AD

If your towel bar has these fittings, use an Allen wrench to turn and unscrew the bar. The process is similar to using pliers, just with a different tool. Remember to turn counterclockwise to loosen the bar.

Method 2: Removing via Screws (Hidden Screws)

In some instances, the towel bar might be secured to the wall with hidden screws. These screws may not be initially visible but could be located beneath an end cap or a decorative feature.

To check for hidden screws, closely examine the towel bar ends. If you see small holes, screw slots, or decorative features that might hide screws, gently try to remove these end pieces or features.

AD

Removing End Caps

If your towel bar has removable end caps, use a flathead or Phillips screwdriver to remove them. These caps usually screw off or press-fit into place.

Gently turn the cap counterclockwise to unscrew it. If it's press-fit, lightly tap it with a hammer and a piece of wood or use pliers to carefully pull it off. Once removed, you should see the screws holding the towel bar onto the wall plate.

Removing Decorative features/hiding screws

Sometimes, Moen towel bars might have decorative features covering the screws. These could be metal rings, metallic inlays, or other aesthetic enhancements.

AD

Carefully remove these decorative pieces using the right tool (screwdriver, pliers, or Allen wrench). Once removed, you should be able to access and unscrew the towel bar from the wall plate.

Once you've removed the towel bar, don't forget to store the hardware safely. If you're planning to reinstall the same bar or use it somewhere else, you'll need these parts again. Happy home improvement!

AD