how to remove delta shower handle with no set screw

How to Remove Delta Shower Handle Without Screw

By Michael White
AD

Ever encountered a Delta shower handle that's stuck or broken, with no visible set screw to remove it? You're not alone. Many Delta shower faucets feature a securing collar that holds the handle in place, requiring a slightly different approach to remove. Don't worry, with the right technique and a bit of patience, you can successfully remove your Delta shower handle without a set screw. Let's walk through this process step-by-step.

Before we begin, it's essential to gather the necessary tools. For this task, you'll need a flathead screwdriver, a pair of pliers, and potentially a pair of vise grips. Also, make sure to turn off the water supply to your shower at the main water shutoff valve to prevent any water damage.

Preparing to Remove the Delta Shower Handle

Initially, you might think that removing the handle is as simple as turning it counterclockwise. However, Delta faucets secure their handles using a metal retaining collar, which requires a different approach. Don't attempt to force the handle off, as this could damage it or cause water leaks.

AD
How to Remove Your Delta Shower Handle: A Complete Guide
How to Remove Your Delta Shower Handle: A Complete Guide
Screwless Shower Handle Removal: Step-by-Step Tips
Screwless Shower Handle Removal: Step-by-Step Tips
Trying to remove a single handle shower faucet with stripped out set screw
Trying to remove a single handle shower faucet with stripped out set screw

First, you need to identify the type of retaining collar on your Delta faucet. Delta uses two primary collar types - one that slips off and another that unscrews. The 'slip off' collar is usually found on older models, while the 'unscrew' collar is common in newer ones.

Identifying the Collar Type

To identify your collar type, first, remove the decorative cap (if present) from the base of the shower handle using your flathead screwdriver. Then, look for a small indentation or groove around the handle's base. If you see one, your faucet likely has a 'slip off' collar. If not, it probably has an 'unscrew' collar.

Dealing with a stuck Delta shower handle? No stress, here’s how to get it off!
Dealing with a stuck Delta shower handle? No stress, here’s how to get it off!
a person is holding the handle on a bathroom faucet
a person is holding the handle on a bathroom faucet

Once you've identified your collar type, you're ready to proceed with the removal process.

Removing the Shower Handle

If your faucet has a 'slip off' collar:

AD
  • Carefully insert the tip of your flathead screwdriver into the indentation around the handle's base.
  • Gently pull the handle towards you while simultaneously applying a slight counterclockwise twisting motion.
  • Continue pulling and twisting until the collar slides off the handle, allowing you to remove it from the faucet.

If your faucet has an 'unscrew' collar:

  • Insert the tip of your flathead screwdriver into the indentation at the base of the handle.
  • Instead of pulling, apply firm pressure while turning the handle clockwise.
  • Keep turning until the retaining collar comes loose and unscrews from the handle, at which point you can remove the handle.

In some cases, you might encounter stubborn collars that refuse to budge. If this happens, you can use a pair of pliers or vise grips to apply extra pressure and torque. However, be extremely careful not to apply too much force and damage the faucet.

Removing the Handle's Internal Parts

With the handle now removed, you'll see the internal parts of the faucet. Carefully unscrew and remove the escutcheon (the decorative plate) and the retainer clip (if present) using your flathead screwdriver or pliers.

AD

After removing these parts, you can proceed with repairs or replacing the old handle with a new one. Make sure to align the new handle's pins with the faucet's slots before pushing it into place. Once the handle is secured, reattach the decorative cap (if present), and turn the water supply back on.

Test the New Handle

Before finishing, test the new handle to ensure it operates correctly. Turn the water on and off, checking for any leaks or issues with the flow. If everything works as expected, you've successfully replaced your Delta shower handle without using a set screw!

Congratulations on your successful handiwork! By following these steps, you've managed to remove and replace your Delta shower handle like a pro. Don't forget to dispose of the old parts responsibly and store any remaining screws and clips in a safe place for future reference.

AD
AD