how to remove links from motorcycle chain

how-to-remove-links-motorcycle-chain

By Andrew Miller
AD

Severing ties with your motorcycle's chain is no minor task, as with regular use, links can became firmly interconnected. However, removing links from a motorcycle chain is essential for maintenance and adjustments. Let's delve into the step-by-step process of how to safely and efficiently remove links from your motorcycle chain.

Before you start, ensure you have all the necessary tools: chain breaker tool, a hammer, a flat piece of metal such as a piece of angle iron or an anvil, and a new master link if replacement is needed. Also, it's crucial to have your motorcycle on a stable support to prevent any accidents.

Preparation and Understanding the Chain

To begin, it's essential to understand your chain's three main components: master link, rivets, and connecting links.

AD
How to make: Motorcycle Chain Master Link Pliers
How to make: Motorcycle Chain Master Link Pliers
How to Clean Motorcycle Chain (Complete Guide) | Smooth Ride Guaranteed
How to Clean Motorcycle Chain (Complete Guide) | Smooth Ride Guaranteed
7 Symptoms Your Motorcycle Chain Is Too Loose (Solved)
7 Symptoms Your Motorcycle Chain Is Too Loose (Solved)

The master link, typically present at either end of the chain, enables easy removal of links. Rivets fasten the plates of the chain, while connecting links join the chain's sections, allowing it to wrap around the sprockets.

Identify the Master Link

Find the master link, usually marked by a 'M' or 'MASTER' stamping. If your chain doesn't have a master link, it might use solid pins and rivets, making removal more challenging but not impossible.

How To Adjust The Chain Slack On Your Motorcycle - SlashGear
How To Adjust The Chain Slack On Your Motorcycle - SlashGear
How To: Motorcycle Chain Cleaning
How To: Motorcycle Chain Cleaning

Locate the pin that holds the master link together. It might be Workers, smooth, or have a tang that sticks out.

Choose the Right Chain Breaker Tool

Gather your chain breaker tool that aligns with your chain's type. Some chains require specific tools, so check your manufacturer's instructions if unsure.

AD

Standard chain breakers have a central, rotating cam that presses against the chain pin while a punch presses against the opposite side, popping the pin out.

Removing the Master Link

With your tools ready, let's proceed with removing the master link.

Start by pressing the cam of the chain breaker against the pin of the master link. Hold the tool firmly in place using your thighs or a vise.

AD

Strike the punch end of the tool with a hammer. The force should press the pin out of the master link. A sharp, loud crack usually indicates success.

Prying Apart the Master Link

After the pin pops out, you might need to use a flat piece of metal to prize apart the two halves of the master link. Tapping it gently with a hammer can help.

Once separated, remove the link completely from the chain. If you're replacing the chain, discard the old master link. Otherwise, keep it for potential reuse later.

AD

Removing Additional Links

To remove more links, position the chain breaker tool against a pin in your chain, ensuring the punch aligns squarely with the pin's center.

Hammer the punch again until the pin pops out. Reassemble the tool and move onto the next pin, repeating this process until you've reached your desired length.

Regreasing and Final Touches

After removing the appropriate number of links, it's crucial to regrease your chain to prevent the new ends from susceptible to corrosion or rust.

Use a suitable chain lubricant, applying it liberally to the open ends. Allow it to soak for a few minutes before wiping off any excess lube that might attract dirt.

Reattaching the Master Link

If you're reinstalling the same master link, slip the new chain length over it, and click the two halves together, bending the new pin into place.

Alternatively, use a new master link and follow the manufacturer's instructions to connect the ends of the chain.

Recheck the Chain

Once everything is secure, double-check that your chain is correctly installed, tensioned, and adjusted. Give it a wiggle to ensure no sloppy links

Congratulations! You've successfully removed and managed your motorcycle chain links like a pro! Remember, maintaining your chain regularly ensures a smoother ride and enhances your bike's life. Next time your chain needs attention, you'll know exactly what to do.

AD