how to remove motorcycle chain without tool

how_to_remove_motorcycle_chain_without_tool

By Hannah Davis
AD

Removing a motorcycle chain without using specific tools might seem daunting at first, but with the right techniques and a bit of patience, it's a task well within the realm of possibility. In this guide, we will walk you through a step-by-step process of how to remove a motorcycle chain without any tools, ensuring your bike remains in optimal condition.

Before we delve into the process, it's crucial to understand that this method works best on chain-driven motorcycles. For those with a belt or shaft drive, a different approach would be necessary. Now, let's explore the two main topics we'll cover: Preparation and Removal Process.

Preparation

Preparation is the key to a successful chain removal. This ensures you have a smooth and safe process without causing any damage to your motorcycle.

AD
Mastering Motorcycle Chain Cleaning Without a Stand
Mastering Motorcycle Chain Cleaning Without a Stand
How To Adjust The Chain Slack On Your Motorcycle - SlashGear
How To Adjust The Chain Slack On Your Motorcycle - SlashGear
How To Clean Your Motorcycle Chain
How To Clean Your Motorcycle Chain

First, ensure your motorcycle is on a stable, level surface. You can use a motorcycle lift or a sturdy paddock stand to achieve this. This gives you ample room to work and makes the chain removal process safer and more manageable.

Understanding the Chain Tensioner

The chain tensioner is a crucial component in the removal process. It's responsible for keeping the chain under constant tension, reducing slack and wear. Familiarizing yourself with its location and function is vital.

How to Remove and Prevent Motorcycle Chain Rust
How to Remove and Prevent Motorcycle Chain Rust

For most motorcycles, the chain tensioner is situated near the rear sprocket. You'll find it in a small box or casing, often requiring a flathead screwdriver to adjust. Understanding how to manipulate the chain tensioner is vital, as it will allow you to loosen the chain sufficiently for removal.

Gaining Access to the Chain

Before you begin, you'll need to gain access to the chain. This usually involves removing the rear wheel, which can be done by first releasing the brake caliper. You can slide the caliper down the piston, using a rubber band or cable tie to secure it out of the way.

AD

Next, you'll need to remove the axel nut. Using a spanner or breaker bar, loosen the nut, taking care not to damage the thread. Once loose, you can use a hammer or mallet to gently tap the axle outwards, releasing the wheel. With the wheel removed, the chain is exposed and ready for removal.

Removal Process

Now that you've prepared your motorcycle and gained access to the chain, it's time to embark on the removal process itself.

Before starting, ensure you have a sturdy work surface with good lighting. It's also helpful to have a few rags or old t-shirts on hand to protect your motorcycle from scratches.

AD

Relieving Chain Tension

The first step in the removal process is to relieve the tension on the chain. This will make it much easier to remove. You can do this by using the chain tensioner, adjusting it in a way that reduces the tension on the chain.

For those with adjustable chain tensioners, this can be done using the adjusting bolt, usually located at the bottom of the tensioner. Turning this bolt clockwise will release the tension, allowing you to remove the chain. For non-adjustable tensioners, you may need to remove the sprocket, which can be done using a sprocket removal tool or a large screwdriver.

Breaking the Chain

Once you've relieved the tension, the next step is to break the chain. Start by locating the master link - the link that holds the entire chain together. On most motorcycles, this will be the link that can move up and down.

AD

To break the chain, you'll need to push both ends of the master link away from each other. This will release the chain from its loop. Depending on the type of master link, you may need to use a flathead screwdriver or a pair of pliers. If the chain is still proving stubborn, you can gently tap one side with a small hammer.

With the chain now broken, you can maneuver it out of the way, disconnecting it from the sprocket. If there's any resistance, use the chain breaker tool or a large screwdriver to gently ease the chain off the sprocket teeth. Once removed, it's advisable to lubricate the new chain you'll be installing.

And there you have it! Removing a motorcycle chain without tools is not only possible but also a valuable skill for any motorcycle owner. Whether you're preparing for a chain replacement, or need to remove the chain temporarily for other maintenance tasks, these steps provide a safe and effective method for doing so.

AD