how to remove gear shift knob jeep wrangler

"Easy Steps: Remove Gear Shift Knob Jeep Wrangler"

By Anthony Clark
AD

Ready to update the interior of your Jeep Wrangler? Removing the gear shift knob may seem daunting, but with the right steps, it's a straightforward process. Let's guide you through how to safely and effectively remove the gear shift knob from your Jeep Wrangler.

Before we start, keep in mind that this task requires basic tools and a little patience. It's important not to rush, as taking your time will help prevent any damage to your vehicle.

Preparation for Removal

The first step in safely removing the gear shift knob is preparation. Assemble your tools, find a comfortable workspace, and ensure your vehicle is in 'Park' mode.

AD
Jeep JK Best Shift Knob Removal
Jeep JK Best Shift Knob Removal
a person holding an object in their hand while sitting in the driver's seat
a person holding an object in their hand while sitting in the driver's seat
Who knew 🤯
Who knew 🤯

Here's a list of tools you'll need: a flathead screwdriver, a ratchet set with a 10mm socket, and a towel or rag to protect the surrounding surfaces.

Disconnect the Negative Battery Cable

Safety first! Before starting any electrical work or adjustments, ensure you disconnect the negative battery terminal. This step is crucial to prevent short circuits and electrical issues.

The Secret to remove Jeep Wrangler Doors #jeep #jeepwrangler #jeeplife
The Secret to remove Jeep Wrangler Doors #jeep #jeepwrangler #jeeplife
Jeep Shifter Knob Install
Jeep Shifter Knob Install

Using your flathead screwdriver, carefully loosen the nut holding the cable in place, then slide the cable off the terminal. Once the cable is removed, place it aside somewhere safe where it won't accidentally touch the battery terminal.

Remove the Shift Boot

The shift boot is the decorative covering around the gear shift lever. You'll need to remove this to access the lever's lock pin. Start by placing a towel or rag on the transmission tunnel to protect it from any scratches.

AD

Using your flathead screwdriver, carefully pry the edges of the boot away from the shift lever. Work your way around the boot until it's loose enough to grip and pull off. If the boot is held in place by clips, you might need to gently push the clips out using the screwdriver tip.

Removing the Gear Shift Knob

Now that you've prepared your Wrangler and removed the shift boot, you're ready to remove the gear shift knob itself.

Here's where you'll use your ratchet and 10mm socket. The knob is secured by a bolt at the base of the shift lever. Position your socket over the bolt and connect it to the ratchet handle.

AD

Unbolt the Gear Shift Knob

Once everything is secure, use the ratchet to turn the socket counterclockwise. Be gentle at first, as the bolt may be tight. You should feel the bolt give way and start to unscrew.

Keep turning the ratchet until the bolt is completely removed. As it comes out, the gear shift knob should slide off the lever. If it feels stuck, you might need to wiggle or twist the knob slightly to break any remaining sealant.

Inspect the Gear Shift Lever

With the knob removed, take a moment to inspect the end of the gear shift lever. You should see a small hole, which is where the lock pin will reengage when you reattach the knob.

AD

Ensure there's no debris or dirt in the hole. If there is, gently brush it out using a clean, dry cloth. This will help ensure a smooth fit when you reattach the knob later.

Reattaching the New Gear Shift Knob

Now that you've successfully removed your old gear shift knob, you're ready to install a new one. The reverse process is essentially the same, but with a few extra steps to ensure a secure fit.

Before you start, make sure your new knob is compatible with your Jeep Wrangler model and year. A proper fit is crucial to prevent any issues with shifting gears.

Apply Antiseize to the Nut

Before reattaching the knob, apply a small amount of Antiseize to the threads of the bolt. This will help prevent corrosion and make future removals easier.

Use a small drop, as too much can cause the threads to become slippery and difficult to engage. Spread the Antiseize evenly using your finger or a clean cloth.

Reattach the Gear Shift Knob

Position the new gear shift knob onto the gear lever, ensuring the hole in the knob lines up with the lock pin. The knob should fit snugly, with the lock pin engaging firmly and holding the knob in place.

With the knob securely in place, insert the bolt through the knob and into the threads at the end of the gear shift lever. Using your ratchet and socket, tighten the bolt clockwise until it's snug, but not overly tight. Be careful not to overtighten, as this can strip the threads or damage the lever.

Reassemble the Shift Boot

With the new gear shift knob securely attached, it's time to reassemble the shift boot. Once again, start at one corner and work your way around, pushing the boot back into place until it's securely fitted.

If your boot had clips holding it in place, ensure each clip snaps back into place. If needed, use your flathead screwdriver to gently nudge the clips back into their slots.

Finally, reconnect the negative battery cable and you're ready to hit the road with your new gear shift knob. Enjoy your updated Jeep Wrangler interior!

AD