Easy Steps: Remove Back Seat from Jeep Wrangler
Ever found yourself needing extra cargo space in your Jeep Wrangler but struggling with the back seat taking up valuable real estate? Good news, removing your Wrangler's back seat isn't as daunting as it sounds. With the right tools and a bit of time, you'll have your Jeep ready for even more adventure. Let's dive into a step-by-step guide to remove that back seat safely and effectively.
Before we start, a quick note: This process may vary slightly depending on whether you have a two- or four-door Wrangler, as well as the model year. But don't worry, the basic steps remain the same. Now, let's gear up and get started.
Preparation: Gather Tools and Check Your Jeep's Configuration
The first step is to gather your tools. You'll need a ratchet or socket wrench set, a flathead screwdriver, and, optionally, a drill with a metal bit for bolting through sheet metal. As for your Wrangler's configuration, knowing if you have two or four doors and the seat type (e.g., bench seat or individual seats) will help guide you through the process.
With your tools ready and a clear understanding of your Jeep's layout, it's time to roll up your sleeves and dive under the seat.
Tophat Removal (Two-Door Wranglers)
If you're rocking a two-door Wrangler with a top hat (the center hump), you'll start by removing this. Use your ratchet or socket wrench to loosen and remove the bolts holding the top hat in place. You might need a drill to remove some bolts if they've been overtightened or rusted over. Once free, pull the top hat out and put it aside.
With the top hat gone, you'll have exposed the Lower Rail Bolts, bringing us to the next step.
Lower Rail Bolts Removal
Locate the four Lower Rail Bolts holding the back seat in place. Grab your ratchet or socket wrench and start by removing these bolts. Be prepared to use some muscle as these bolts can be tight. Once all four bolts are removed, the back seat should be free to lift out.
If you're having trouble getting the seat out, try lifting it from the top while someone else supports the bottom. This can help break any stubborn rust or adhesive that may have formed over time.
Seat Removal (Four-Door Wranglers or Individual Seats)
For those with a four-door Wrangler or individual seats, the process is a bit different. Start by locating the bolts in the footwells. These bolts will either be on the outer edges of the footwells or under the seat itself, depending on your model year.
Use your ratchet or socket wrench to remove these bolts. Again, you might need to drill out some bolts if they're stripped or rusted over. With all bolts removed, lift the seat out. In many cases, you can do this alone, but having a helper to support the seat's weight can make the process much easier.
Removing the Seat Belts (Optional but Recommended)
Before you completely remove the seat, consider disconnecting the seat belts. This will make moving the seat easier and help prevent any stress on the seat belt retractor mechanism. To do this, look under the seat and locate the seat belt anchor bolts. Remove these bolts using your ratchet or socket wrench.
With the seat belts disconnected, carefully lay the seat on its back. Congratulations, you've just freed up a ton of cargo space in your Jeep Wrangler!
Reinstalling the Seat (If Needed)
If you decide you want the back seat again, reinstalling it is as simple as reversing the process. Make sure to reattach the seat belts if you disconnected them, and double-check that all bolts are secure and tight.
And that's it! You've successfully removed the back seat from your Jeep Wrangler, opening up a world of new possibilities for cargo and adventure. So, what are you waiting for? Go load up your Jeep and hit the trails!