how to remove dust cover ar 15

Remove Dust Cover AR-15: A Simple Step-by-Step Guide

By Christopher Clark
AD

Ever found your AR-15 rifle coated with a layer of dust after it's been stored away? Removing that dust cover isn't as simple as a quick wipe. To maintain your AR-15's performance and longevity, you should remove the dust cover systematically to ensure all components are clean and protected. Let's delve into the process with this comprehensive guide on how to remove dust cover on an AR-15.

Before you start, gather your essential tools: a cleaning kit, a few rags or cleaning patches, solvent, and lubricant. Also, ensure your rifle is unloaded and the chamber is clear to prioritize safety.

Understanding the AR-15 Dust Cover

The AR-15 dust cover, also known as the forward assist, plays a crucial role in the rifle's operation. It helps eject a stuck case from the chamber and keeps dust and debris out. Removing it allows access to critical parts for thorough cleaning. Let's explore the process under two primary headings: removing the dust cover and reinstalling it.

AD
DIY AR-15 Trigger Polishing Job for $17.06! - Prepper Press
DIY AR-15 Trigger Polishing Job for $17.06! - Prepper Press
PSA AK-V Part Three: Changing the Brace, Adding a Red Dot and Installing A Quick Takedown Pin For The Dust Cover - Ronin's Grips
PSA AK-V Part Three: Changing the Brace, Adding a Red Dot and Installing A Quick Takedown Pin For The Dust Cover - Ronin's Grips
Armor-Tuff® 6.8 SPC II Ejection Port Dust Cover Falcon Lock Rim Exit Devices Specifications, Camouflage Military Radio Equipment, High-quality Reloading Equipment, Prc 10 Military Radio, Black 13-pin Trailer Connector, Ar Build, Black Armor, Dust Cover, Long Legs
Armor-Tuff® 6.8 SPC II Ejection Port Dust Cover Falcon Lock Rim Exit Devices Specifications, Camouflage Military Radio Equipment, High-quality Reloading Equipment, Prc 10 Military Radio, Black 13-pin Trailer Connector, Ar Build, Black Armor, Dust Cover, Long Legs

Preparation and Removal

To remove the dust cover, first, locate the two pins that hold the cover in place. These pins sit at the front of the receiver, just forward of the ejection port. Use your punch or a similar tool to depress one pin, then use a magnetized pin removal tool or needle-nose pliers to extract it. Repeat this process for the second pin.

Once both pins are removed, the dust cover should slide forward and off the front of the receiver. If it's stubborn, gently tap the cover with a plastic or wooden mallet to loosen it. Be cautious not to damage the cover or surrounding parts.

The Best Ways to Reduce Dust in Your Home Naturally
The Best Ways to Reduce Dust in Your Home Naturally
HAO PTW L119A2 IUR: Beta Release – Part 4
HAO PTW L119A2 IUR: Beta Release – Part 4

Cleaning the Dust Cover

With the dust cover removed, inspect it for any dirt or grime. Use a soft-bristled brush or a cleaning patch dampened with solvent to scrub away any residue. Be sure to clean both the interior and exterior surfaces.

Similarly, clean the area where the dust cover sits on the receiver. This will help prevent the cover from binding when you reinstall it and ensure smooth operation. Use a cleaning patch to wipe away any dirt or debris from the pin holes as well.

AD

Cleaning the AR-15 with the Dust Cover Off

With the dust cover removed, you can now access the bolt carrier group (BCG) and the interior of the upper receiver for a thorough cleaning. This process is essential to maintain your AR-15's reliability and prevent malfunction.

Cleaning the Bolt Carrier Group

The BCG includes the bolt, carrier, and gas key. First, remove the BCG from the upper receiver by pulling it to the rear and lifting it out. Inspect the BCG for any carbon buildup or excessive wear. Use a toothbrush and solvent to clean the bolt and carrier, then wipe them dry with a clean rag.

Pay close attention to the gas key and the area where the gas tube connects. This can be a source of excessive carbon buildup, which can negatively impact your rifle's performance. Clean this area diligently, and consider replacing the gas key or gas tube if they show signs of excessive wear or damage.

AD

Cleaning the Upper Receiver

With the BCG removed, you can now clean the interior of the upper receiver. Use a cleaning patch dampened with solvent to wipe away any dirt or carbon from the interior walls. Pay particular attention to the area around the ejection port and the chamber.

While cleaning the upper receiver, ensure that the barrel extension and barrel itself are properly lubricated. Apply a light coat of lubricant to these components, as well as the tapers on the bolt carrier and barrel extension.

Reinstalling the Dust Cover

Once you've finished cleaning the AR-15, it's time to reinstall the dust cover. Start by ensuring the dust cover is clean and dry. Align the cover with the pin holes on the upper receiver, and gently slide it into place.

AD

Replacing the Pins

With the dust cover in position, reinsert the first pin using the magnetized pin removal tool or needle-nose pliers. Tap the pin into place using a plastic or wooden mallet to ensure a snug fit. Repeat this process for the second pin.

Once both pins are securely in place, test the dust cover by pulling it to the rear. It should slide back and forth smoothly. If it's binding or difficult to move, you may need to adjust the pins or clean the dust cover and pin holes again.

With the dust cover properly removed, cleaned, and reinstall, your AR-15 is ready for duty again. Regularly maintaining your rifle in this manner will help prolong its lifespan and ensure it remains reliable and accurate. Happy shooting, and remember to always prioritize safety!

AD