how to remove ar 15 handguard

Securely Remove AR-15 Handguard: Step-by-Step Guide

By Richard Robinson
AD

Whether you're updating your AR-15 for a different barrel setup or simply want to replace your existing handguard, removing the current one is the first step. This process isn't as daunting as it might seem and can be accomplished with the right tools and a bit of patience. Let's dive into a step-by-step guide on how to remove an AR-15 handguard.

Before we begin, ensure you have a safe and clean workspace, and always remember to follow proper gun safety procedures. You'll need a few tools for this task, including a delta ring pin punch, a bench vise, a hammer, and an AR-15 cleaning kit.

Understanding the AR-15 Handguard Setup

To remove your AR-15 handguard, it's crucial to understand its setup first. The handguard is secured by the delta ring and retention pin, which fit into the handguard retaining cap. The barrel nut holds everything in place.

AD
Removing an AR 15 A2 Front Sight - Step by Step How To Guide
Removing an AR 15 A2 Front Sight - Step by Step How To Guide
a hand is holding the handlebars on a bicycle
a hand is holding the handlebars on a bicycle
Leapers UTG Pro model 4/15 Drop-in Hand Guard - Unboxing
Leapers UTG Pro model 4/15 Drop-in Hand Guard - Unboxing

There are two primary types of AR-15 handguards: standard (MIL-SPEC) and free-float. The removal process is slightly different for each, so let's explore both.

Removing a Standard (MIL-SPEC) AR-15 Handguard

1. **Secure the Rifle**: Place the AR-15 in a bench vise, ensuring the receiver is secure and the handguard isn't pinched. Wrap the jaws of the vise with rags to protect the rifle's finish.

MUST HAVE Best AR 15 Upgrades Under $100 (VIDEO)
MUST HAVE Best AR 15 Upgrades Under $100 (VIDEO)
Arx 160, Urgi M4, Tactical Revolver, Ar Builds, Custom Ar, Ar Platform, Ar Build, Tactical Gear Loadout, Tactical Gear
Arx 160, Urgi M4, Tactical Revolver, Ar Builds, Custom Ar, Ar Platform, Ar Build, Tactical Gear Loadout, Tactical Gear

2. **Remove the Delta Ring**: Use a delta ring pin punch to push the delta ring pin out. Tap the punch gently with a hammer until the pin pops out. Then, slide the delta ring off.

Removing a Free-Float AR-15 Handguard

1. **Secure the Handguard**: Place the AR-15 in a vise, but this time, secure the free-float handguard between the jaws instead of the receiver. Again, wrap the jaws with rags to prevent damage to the handguard's finish.

AD

2. **Remove the Barrel Nut Retaining Screw**: Many free-float handguards have a retaining screw that needs to be removed first. Use a screwdriver or an allen wrench (based on the screw's design) to loosen and remove it.

Disassembling the Handguard

Once you've removed the delta ring or barrel nut retaining screw, it's time to disassemble the handguard itself.

1. **Remove the Retaining Cap**: The retaining cap sits atop the delta ring (in standard handguards) or is screwed into the barrel nut (in free-float handguards). Use your fingers or pliers to unscrew and remove it.

AD

Removing the Handguard from the Barrel Nut

1. **Secure the Barrel**: Place the barrel in a bench vise, ensuring it's secure and the receiver isn't damaged.

2. **Heat the Handguard**: Free-float handguards can sometimes be tough to remove due to the tight fit between the handguard and the barrel nut. To make this process easier, you can heat the handguard using a heat gun or a hairdryer. Be careful not to overheat the handguard and cause damage.

3. **Remove the Handguard**: With the handguard heated, use a flathead screwdriver or a pry bar to carefully pry the handguard off the barrel nut. You may need to use some force, but be cautious not to damage the handguard or the barrel nut.

AD

Congratulations, you've successfully removed your AR-15 handguard! Remember to store the removed parts safely, and consider cleaning your AR-15 before installing a new handguard.

Before you start any new project, don't forget to familiarize yourself with gun safety and disassembly principles. If you're unsure about any step, don't hesitate to seek professional advice. Happy AR-15 building!

AD