how to remove cabinet doors with soft close hinges

How to Remove Cabinet Doors with Soft Close Hinges

By Robert Jones
AD

If you're planning to replace or refinish your cabinet doors, removing them can seem like a daunting task, especially when they're equipped with soft close hinges. But fear not, as we've outlined a step-by-step guide to help you through this process safely and efficiently.

Before you start, gather your tools: a screwdriver (usually Phillips but check your hinges), a cloth or towel, and maybe a hammer for some extra leverage. And remember, safety first! Unplug any nearby appliances and ensure the area is cleared.

Understanding Your Hinges

Soft close hinges are designed to gently shut your doors, preventing those abrupt slams. They're typically equipped with a buffer or damper mechanism. Understanding this will help you manipulate them cautiously during removal.

AD
Soft-Close Hinge Stopped Working: Causes and Repair - HomelyVille
Soft-Close Hinge Stopped Working: Causes and Repair - HomelyVille
Cabinet Door Won’t Close? How to Fix Cabinet Hinges Like a Pro
Cabinet Door Won’t Close? How to Fix Cabinet Hinges Like a Pro
Soft Close Cabinet Doors
Soft Close Cabinet Doors

Before touching any screws, ensure you know the direction your doors open. It's a small detail, but it'll help you avoid damaging your doors or hinges later on.

Locating Your Hinge Screws

Screws on soft close hinges can be hidden behind decorative faces or under matching screws. You might need to peel off a small vinyl or wooden cover to reveal them. Use a gentle touch, so you don't damage these parts.

an image of how to adjust old cabinet door hinges complete guide by materialsix com
an image of how to adjust old cabinet door hinges complete guide by materialsix com
Replacing Cabinet Hinges with Overlay Self Closing Hinges
Replacing Cabinet Hinges with Overlay Self Closing Hinges

Once exposed, make note of the screws' lengths and positions. It'll aid in reattachment later. Also, snap a picture for reference if needed.

Loosening the Screws

Using your screwdriver, begin loosening the screws. Be careful not to strip them. If necessary, use a hammer to apply gentle pressure on the screwdriver, but be mindful of the surrounding area.

AD

Don't remove the screws entirely yet. Loosen them enough that you can turn the hinge without the screw falling out. This will help keep your doors aligned until you're ready to remove them completely.

Removing the Doors

Now that your screws are loosened, you're ready to remove the doors. Start with one side of the hinge and gently pull the door towards you. It's a delicate process, and some doors might require a bit of maneuvering.

If the hinge is stubborn, try nudging the door a bit more, rocking it backwards and forwards. But be cautious; you don't want to break the hinge or damage the door itself.

AD

Handling the Soft Close Mechanism

As you remove the door, you might expose the soft close mechanism. Be mindful of this part; it's usually what makes the door slow down as it closes. If it's in your way, gently move it aside, but avoid breaking it.

If your hinge has a buffer that pops up, ensure it's pushed down before removing the door. This should give you enough room to pull the door free.

Disconnecting the Hinge

Once the door is off, the hinge might still be partially attached to the cabinet. Most soft close hinges have two parts: one attached to the door, one to the cabinet. You need to remove both.

AD

Using your screwdriver, remove the remaining screws and carefully pull off the hinge. If it's stuck, gently tap it with a hammer to break the suction, but be delicate to avoid damaging the cabinet.

Cleaning Up and Preparation for Reattachment

Congratulations, you've successfully removed your cabinet doors! But your work isn't done yet. Give your hinge and screw holes a quick wipe with a damp cloth to remove any debris or dust.

Before reattaching your doors, measure and mark your hinges and screw holes. This will ensure your doors go back on straight and true. Pre-drilling new screw holes can also help prevent splitting the wood.

Once you're ready, gently reattach your doors, ensuring they line up with the cabinet face. Tighten your screws, but not so tight they strip. Then, stand back and admire your work. You've just handled soft close cabinet doors like a pro!

AD