Easy Retrofit: Upgrade Old Cabinets with Soft Close Hinges
Old cabinet doors slamming can cause damage and noise. Soft close hinges provide a seamless, quiet close, perfect for updating your old cabinets. Here's a comprehensive guide on how to install soft close hinges on old cabinets. Let's dive in!
Before we begin, ensure you have the right hinges. Measure your cabinet doors and choose hinges compatible with your door thickness and overlay style. Gather your tools: soft close hinges, screwdriver, drill, chisel, sandpaper, and clamps. Let's start!
Removing Old Hinges
Begin by unscrewing and removing the old hinges. If they're stuck, use a bit of force. If the screws are stripped, you might need to drill them out.
Once removed, light sanding may be needed to smooth any rough edges left behind. This will ensure a smooth surface for your new hinges.
Measuring and Marking
Use your new soft close hinge as a template. Place it where the top hinge will go and trace around it. This is your guide for drilling new holes.
Repeat this process for all hinges. It's crucial to mark and drill in the same spots to maintain your cabinet's original alignment.
Drilling New Holes
Using a drill bit slightly smaller than the diameter of your hinge screw, carefully drill new holes where you've marked. Ensure your drill is perpendicular to the surface to prevent wonky hinges.
If your cabinet has a lip at the top, you may need to use a chisel to create a recess for the hinge's arm to pivot in. Be cautious not to chisel too deep or wide.
Installing Soft Close Hinges
With all holes drilled and any recesses chiseled, it's time to install the soft close hinges.
Start from the top. Align the hinge with your mark and the hole you've drilled. If your hinge comes with adjustable brackets, now's the time to set them. They usually adjust for door width and plunge depth.
Adjustable Brackets
Most soft close hinges come with adjustable brackets. Typically, you'll adjust them with an Allen wrench. Tightening or loosening the screws will adjust the bracket's size, allowing you to fine-tune the door's fit.
Remember, the door should fit snugly. Too loose, and the soft close mechanism won't work properly. Too tight, and the door won't close все. Take your time to get it just right.
Securing the Hinges
Once adjusted, secure the hinges with the screws provided. Ensure they're tight and secure. If they're too long, you can counter-sink them slightly. Be careful not to strip the screw holes.
Attach the door to the hinge. Give it a gentle close to test the soft close mechanism. Make any necessary adjustments. Repeat this process for all hinges and doors.
Congratulations, your old cabinets now have soft close hinges! The satisfying, quiet close will not only extend the life of your cabinets but also add a touch of modern elegance. Enjoy your updated space. If you're feeling adventurous, consider tackling other cabinet updates next!