how to remove bolt from savage axis

How to Remove a Bolt from Your Savage Axis

By Rachel Martinez
AD

Are you facing trouble retrieving a bolt from your Savage Axis rifle? Don't worry, you're not alone. Bolts can sometimes get stuck due to corrosion, overtightening, or damage. Here's a step-by-step guide on how to remove a bolt from your Savage Axis, optimized for your understanding and search engine visibility.

Before you start, gather your tools. You'll need a bolt removal tool or a set of Allen wrenches, penetrating oil like WD-40 or PB Blaster, a torque wrench, and some rags or paper towels. Make sure you're working in a safe, well-lit area, and always follow proper firearm safety protocols.

Understanding the Bolt Mechanism

The Savage Axis bolt is typically easy to remove, but it's crucial to understand its mechanism first. The bolt carrier group (BCG) consists of the bolt, bolt carrier, and firing pin. The bolt assembly is held in place by a bolt hold-open device. Before removal, ensure the rifle is unloaded, and the magazine is removed.

AD
How to remove a Pilot Bush(ing) aka Spigot Bush(ing) with a bolt, nut, screwdriver, ratchet/socket
How to remove a Pilot Bush(ing) aka Spigot Bush(ing) with a bolt, nut, screwdriver, ratchet/socket
Savage 93r17 Diy Bore Guide
Savage 93r17 Diy Bore Guide
SKS Bolt mod for easy insertion of aftermarket mag when...
SKS Bolt mod for easy insertion of aftermarket mag when...

Always remember that excessive force should never be used while removing the bolt. Forcing the bolt can cause damage to the rifle or injury to yourself. Let's move on to the removal process.

Preparation: Applying Penetrating Oil

Start by applying penetrating oil to the bolt. This will help loosen any rust or stubbornشاطíkers caused by corrosion or overtightening. Spray the oil liberally onto the bolt and let it sit for about 15-30 minutes. This gives the oil time to work its way into the tight spots.

How to Remove a Stripped Bolt Using a Screwdriver (+9 Other Methods)
How to Remove a Stripped Bolt Using a Screwdriver (+9 Other Methods)
Savage Axis - Replacing plastic hardware on Boyds Stock
Savage Axis - Replacing plastic hardware on Boyds Stock

While the oil is doing its job, prepare your Allen wrenches or bolt removal tool. If you're using a set of Allen wrenches, you'll need one that fits the Allen screw on the top of the bolt. A bolt removal tool is designed specifically for this task and usually comes with the rifle. These tools have a pass-through design that allows the firing pin to be retracted while the bolt is removed.

Removing the Bolt

After the oil has had time to work, proceed to remove the bolt. If you're using an Allen wrench, insert it into the bolt and turn it counterclockwise until it stops. You should feel some resistance, but the bolt shouldn't bind. If it does, apply more oil and wait a bit longer.

AD

If you're using a bolt removal tool, first retract the firing pin by pulling the tool straight back. This should disengage the firing pin from the bolt carrier. Next, turn the tool counterclockwise to unscrew the bolt. Again, some resistance is normal, but avoid using excessive force.

Inspecting and Reassembling the Bolt

Once the bolt is removed, take a good look at its condition. Check for signs of wear, damage, or excessive corrosion. If you find any issues, it may be time to consider replacing the bolt or having your rifle professionally serviced.

Before reinserting the bolt, wipe it down with a clean rag or paper towel to remove any residual oil. Then, reattach the bolt handle and verify that the bolt operates smoothly. Remember, the bolt should require a moderate amount of force to pull back and set in place. If it's too tight or too loose, you may need to adjust the Bolt Head Retaining Screw.

AD

Replacing the Bolt

Reinstalling the bolt is simply the reverse of the removal process. First, make sure the bolt is aligned correctly. The bolt handle should be in the 12 o'clock position, with the disassembly notch on the bolt carrier aligned with the lever on the right side of the receiver.

Slide the bolt assembly into the receiver until it meets resistance. Once the bolt is fully seated, use an Allen wrench to tighten the bolt hold-open device to the correct torque specification (usually between 20-30 in-lbs for Savage Arms rifles). Finally, check the bolt's operation again to ensure everything is working properly.

Congratulations, you've successfully removed and replaced the bolt on your Savage Axis! Regular cleaning and maintenance are crucial to keep your rifle running smoothly. Always store your firearm in a safe, secure location, and remember to follow all local laws and regulations regarding firearm ownership and use. Happy shooting!

AD
AD