Savage 110: How to Remove Bolt
The Savage 110 is a popular bolt-action rifle, but there may come a time when you need to remove the bolt for maintenance, cleaning, or replacement. However, the process isn't as straightforward as you might think. This guide will walk you through the steps to safely remove the bolt from your Savage 110, ensuring you maintain the rifle's performance and longevity.
Before we dive into the process, let's ensure you have the necessary tools. You'll need a punch and a hammer to drive out the bolt stop, a SewGuard brush or a fiber optic light to inspect the bolt hole, and a appropriately sized drift pin or tool to remove the cam pin.
Understanding the Savage 110 Bolt Mechanism
To safely remove the bolt, it's crucial to understand the bolt mechanism's components. The key parts are the bolt, the extracting cam, the bolt stop, the cam pin, and the safety mechanism.
The bolt locks into the barrel extension via two small lugs at the front of the bolt. The extracting cam, connected to the bolt via the cam pin, ensures that the cartridge is properly ejected when the bolt is cycled.
Safety First: Disassembly Preparation
Before you begin the disassembly process, make sure your Savage 110 is unloaded and the chamber is clean. Always follow safe rifle handling procedures. It's a good idea to wear safety glasses during this process as well.
To ensure the rifle is unloaded, open the bolt and visually check the chamber. Then, operate the bolt to eject any dummy rounds or empty cases, if present.
Removing the Bolt Stop
The bolt stop is a small, flat piece of metal located at the front of the trigger guard. It's easiest to remove with the rifle pointing up and the bolt open. Use the punch to tap out the bolt stop. A small amount of force should be enough to eject it.
If the bolt stop is stubborn or damaged, it might require a bit more persuasion. Be careful not to damage the surrounding area. If you're having trouble, you can use a drift pin or a small screwdriver, but be gentle and patient.
Extracting the Bolt
With the bolt stop removed, the bolt is ready to be extracted. Before you proceed, use the SewGuard brush or the fiber optic light to inspect the bolt hole. This helps you identify any foreign objects, corrosion, or malfunctions that could hinder the process.
Once you've confirmed the bolt channel is clear, proceed with the following steps:
Removing the Cam Pin
The cam pin runs through the bolt and the extracting cam. To remove the bolt, the cam pin has to come out first. Place the rifle in a vise, barrel up, to keep it secure. Using a drift pin or an appropriately sized tool, tap the cam pin out from the side.
You might need to test different sizes of drift pins or tools to find the right fit. Once the cam pin is out, the extracting cam will be loose, but it's still connected to the bolt by the bolt's lugs.
Pulling Out the Bolt
With the cam pin removed, the bolt can be separated from the barrel extension. Pull the bolt fully rearward until the bolt's lugs clear the barrel extension. This should require only a small amount of force. If the bolt is difficult to remove, double-check that you've fully retracted the bolt and removed the cam pin.
Once the bolt is removed, set it aside in a safe, accessible location. Now that you have access to the rifle's action and the barrel, you can proceed with any maintenance tasks, cleaning, or upgrades.
Congratulations! You've successfully removed the bolt from your Savage 110. Now that you're familiar with the process, you can confidently perform this task whenever needed. Always remember that proper maintenance, cleaning, and understanding of your rifle's inner workings are key to its longevity and reliability. Happy shooting!